TEP157
Materiales Compuestos
Publications (37) Publications in which a researcher has participated
2020
-
Optimal PV Size and Location to Reduce Active Power Losses while Achieving Very High Penetration Level with Improvement in Voltage Profile Using Modified Jaya Algorithm
IEEE Journal of Photovoltaics, Vol. 10, Núm. 4, pp. 1166-1174
2019
-
Optimal scheduling of household appliances in off-grid hybrid energy system using PSO algorithm for energy saving
International Journal of Renewable Energy Research, Vol. 9, Núm. 1, pp. 427-436
2018
2017
-
Wear Rate and Entropy Generation Sources in a Ti6Al4V-WC/10Co Sliding Pair
Journal of Tribology, Vol. 139, Núm. 6
2016
-
A Hybrid Procedure for the Sequential Estimation of Surface Heat Flux From Measurements of Surface Temperature
Heat Transfer Engineering, Vol. 37, Núm. 16, pp. 1325-1340
-
Approach for locating and tracking the maximum power point of a photovoltaic generator using a centered differentiation method
Sustainable Energy, Grids and Networks, Vol. 8, pp. 62-73
-
Development of a prototype for submarine communications in shallow waters
Instrumentation ViewPoint, Núm. 19
2015
-
An approximate power flow for distribution systems
IEEE Latin America Transactions, Vol. 12, Núm. 8, pp. 1432-1440
-
An efficient approach for the siting and sizing problem of distributed generation
International Journal of Electrical Power and Energy Systems, Vol. 69, pp. 167-172
2014
-
Optimization of pressure hulls of composite materials
16th European Conference on Composite Materials, ECCM 2014
2013
-
Actas del X Congreso Nacional de Materiales Compuestos: Algeciras, 2, 3, 4 y 5 de julio de 2013
Calpe Institute of Technology
-
Optimal distributed generation location and size using a modified teaching-learning based optimization algorithm
International Journal of Electrical Power and Energy Systems, Vol. 50, Núm. 1, pp. 65-75
2012
-
An efficient heuristic algorithm for reconfiguration based on branch power flows direction
International Journal of Electrical Power and Energy Systems, Vol. 41, Núm. 1, pp. 71-75
-
Comments on "a new heuristic approach for optimal reconfiguration in distribution systems" in 81 (2011) 282-289
Electric Power Systems Research, Vol. 83, Núm. 1, pp. 264-265
-
Design and optimization of symmetric laminated composites using a variable neighbourhood search-based model
Engineering Optimization, Vol. 44, Núm. 4, pp. 505-520
-
The influence of the state of the rilem plank when obtaining the fundamental frequency of vibration regarding the foundations of the new faculties at the Universidad de Sevilla (SPAIN)
19th International Congress on Sound and Vibration 2012, ICSV 2012
2011
-
Cálculo de tensiones en la superficie generalizada de recipientes a presión de composites:criterios de fallo
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011
-
Recipientes a presión de composite, con liner metálico sometidos a presión exterior
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011
2010
-
Filter digital form of two future temperature methods for the inverse heat conduction: A spectral comparison
International Journal for Numerical Methods in Biomedical Engineering, Vol. 26, Núm. 5, pp. 554-573
2009
-
Two-dimensional non-linear inverse heat conduction problem based on the singular value decomposition
International Journal of Thermal Sciences, Vol. 48, Núm. 6, pp. 1081-1093