Publications (29)

¹ Publicaciones consideradas como producción del grupo

filter_list General Chemical Engineering

2025

  1. Novel combination of 3D-printing and electrochemical deposition to design and prepare metallic honeycomb supported catalysts for dry reforming of methane

    Chemical Engineering Journal, Vol. 506

2024

  1. Thin Layers of Cerium Oxynitride Deposited via RF Sputtering

    Materials, Vol. 17, Núm. 13

2023

  1. Localized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusion

    Corrosion Science, Vol. 218

2022

  1. Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

    Corrosion Science, Vol. 201

2020

  1. Assessment of the corrosion resistance of self-ordered anodic aluminum oxide (AAO) obtained in tartaric-sulfuric acid (TSA)

    Surface and Coatings Technology, Vol. 399

2018

  1. Porosity Reduction in New Thin Films of Ceramic Coatings on Stainless Steel by Annealing at Reduced Pressure

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 49, Núm. 11, pp. 5858-5870

2014

  1. Identification of key factors in Accelerated Low Water Corrosion through experimental simulation of tidal conditions: Influence of stimulated indigenous microbiota

    Biofouling, Vol. 30, Núm. 3, pp. 281-297

  2. Reliability of electrochemical noise measurements: Results of round-robin testing on electrochemical noise

    Electrochimica Acta, Vol. 120, pp. 379-389

2013

  1. Resistance to corrosion of zirconia coatings deposited by spray pyrolysis in nitrided steel

    Journal of Thermal Spray Technology, Vol. 22, Núm. 7, pp. 1242-1252

  2. Synthesis and characterization of zirconium oxynitride ZrO xNy coatings deposited via unbalanced DC magnetron sputtering

    Materials Chemistry and Physics, Vol. 141, Núm. 1, pp. 42-51

2012

  1. Experimental correlation between metallographic evaluation and electrochemical noise in intergranular corrosion tests of aluminium alloys

    Surface and Interface Analysis, Vol. 44, Núm. 9, pp. 1279-1286

2010

  1. Efecto de la biopelícula en la corrosión de aceros inoxidables austeníticos en estaciones depuradoras de aguas residuales

    Revista de metalurgia, Vol. 46, Núm. 1, pp. 37-51

2009

  1. Medida de ruido electroquímico para el estudio de procesos de corrosión de aleaciones metálicas

    Revista de metalurgia, Vol. 45, Núm. 2, pp. 142-156

2008

  1. Formation and characterization of nanotubes of La(OH)3 obtained using porous alumina membranes

    Nanotechnology, Vol. 19, Núm. 49

2006

  1. Biocorrosion of carbon steel alloys by an hydrogenotrophic sulfate-reducing bacterium Desulfovibrio capillatus isolated from a Mexican oil field separator

    Corrosion Science, Vol. 48, Núm. 9, pp. 2417-2431

2005

  1. Electrochemical evaluation of a high solid coating in acid media

    Simulation of Electrochemical Processes

  2. Shot noise and statistical parameters for the estimation of corrosion mechanisms

    Corrosion Science, Vol. 47, Núm. 12, pp. 3280-3299

2004

  1. Determination of the weaker phase in the pitting corrosion of non-standard low-Ni high-Mn-N duplex stainless steels

    Materials and Corrosion, Vol. 55, Núm. 2, pp. 95-101

  2. Influence of the degree of polishing of alloy AA 5083 on its behaviour against localised alkaline corrosion

    Corrosion Science, Vol. 46, Núm. 8, pp. 1909-1920

  3. Lifetime prediction of waterborne acrylic paints with the AC-DC-AC method

    Progress in Organic Coatings, Vol. 49, Núm. 3, pp. 275-281