Publicaciones (145) Publicaciones de FRANCISCO JAVIER BOTANA PEDEMONTE

2023

  1. Effect of the heat treatment on the mechanical properties and microstructure of Scalmalloy® manufactured by Selective Laser Melting (SLM) under certified conditions

    Materials Characterization, Vol. 196

  2. Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties

    Journal of Materials Research and Technology, Vol. 25, pp. 4409-4424

  3. Localized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusion

    Corrosion Science, Vol. 218

  4. Study of dose dependence on density in planar 3D-printed applicators for HDR Ir192 surface brachytherapy

    Brachytherapy, Vol. 22, Núm. 2, pp. 250-259

2022

  1. Achieving superhydrophobic surfaces with tunable roughness on building materials via nanosecond laser texturing of silane/siloxane coatings

    Journal of Building Engineering, Vol. 58

  2. Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

    Corrosion Science, Vol. 201

2021

  1. 3D-printing of metallic honeycomb monoliths as a doorway to a new generation of catalytic devices: the Ni-based catalysts in methane dry reforming showcase

    Catalysis Communications, Vol. 148

  2. Application of commercial surface pretreatments on the formation of cerium conversion coating (Cecc) over high-strength aluminum alloys 2024-t3 and 7075-t6

    Metals, Vol. 11, Núm. 6

  3. Fast Automated Phase Differentiation in Industrial Stainless Steel by Combining Low-Loss EELS Experiments with Machine Learning-based Algorithms

    Microscopy and Microanalysis, Vol. 27, Núm. S1, pp. 34-36

  4. Study of the influence of laser energy density on the surface roughness of Scalmalloy<sup>®</sup> samples manufactured by DMLS technology

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012036

  5. Study of the influence of laser energy density on the surface roughness of Scalmalloy® samples manufactured by DMLS technology

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2020

  1. Assessment of the corrosion resistance of self-ordered anodic aluminum oxide (AAO) obtained in tartaric-sulfuric acid (TSA)

    Surface and Coatings Technology, Vol. 399

  2. Quantifying phase transformation during the manufacturing process of AISI 430 ferritic stainless steel

    IOP Conference Series: Materials Science and Engineering

2019

  1. Influence of aerospace standard surface pretreatment on the intermetallic phases and cecc of 2024-t3 al-cu alloy

    Metals, Vol. 9, Núm. 3

  2. Modificaciones de la microestructura y la capa pasiva de la aleación 2024-T3 Al-Cu durante una limpieza química empleada en la industria aeroespacial

    Revista de metalurgia, Vol. 55, Núm. 2, pp. 144

  3. The Role of Gold-Alumina Template in the Electrochemical Deposition of CeO2 Nanotubes

    Particle and Particle Systems Characterization, Vol. 36, Núm. 10

2018

  1. Adhesive behaviour of carbon fibre reinforced plastic panels manufactured using woven and unidirectional tape after ultraviolet laser surface treatment

    Journal of Composite Materials, Vol. 52, Núm. 7, pp. 853-865

  2. Caracterización de nuevas generaciones de preimpregnados fuera deautoclave (OoA)

    XII Congreso Nacional de Materiales Compuestos

  3. Efecto del desalineamiento de los marcos de máquinas ensayo sobre las propiedades mecánicas de CFRPs

    Congreso Nacional de Materiales Compuestos

  4. Effects of laser processing parameters on texturized layer development and surface features of Ti6Al4V alloy samples

    Coatings, Vol. 8, Núm. 1