Publicaciones en colaboración con investigadores/as de Universidad de Málaga (23)

2024

  1. Improvement of the tribological behavior of high reinforcement concentration Al–SiC (63%) metal matrix composite through laser surface texturing

    Journal of Materials Research and Technology, Vol. 28, pp. 2338-2346

  2. Predictive models based on RSM and ANN for roughness and wettability achieved by laser texturing of S275 carbon steel alloy

    Optics and Laser Technology, Vol. 168

2023

  1. Influence of the level of connectivity on the members of the Octahedron and X-Octahedron families of tensegrities

    Engineering Structures, Vol. 296

2022

  1. Development in Sustainable Concrete with the Replacement of Fume Dust and Slag from the Steel Industry

    Materials, Vol. 15, Núm. 17

  2. Effect of the addition of electric arc furnace dust on the mechanical properties and carbonation performance of concrete

    European Journal of Environmental and Civil Engineering, Vol. 26, Núm. 7, pp. 2767-2779

  3. Strategies to Incorporate Ground-Granulated Blast-Furnace Slag and Copper Slag into Ultrahigh-Performance Fiber-Reinforced Concrete

    Journal of Materials in Civil Engineering, Vol. 34, Núm. 12

  4. Ultra-high performance concrete (uhpc) with substitution of cementitious matrix by waste

    CMMost 2021: 6th International Conference on Mechanical Models in Structural Engineering

2021

  1. Deep neural networks architecture driven by problem-specific information

    Neural Computing and Applications, Vol. 33, Núm. 15, pp. 9403-9423

  2. Influence of steel slag type on concrete shrinkage

    Sustainability (Switzerland), Vol. 13, Núm. 1, pp. 1-13

2020

  1. Advances in the analysis of properties behaviour of cement-based grouts with high substitution of cement with blast furnace slags

    Materials, Vol. 13, Núm. 3

2019

  1. Spatial and meteorological relevance in NO 2 estimations: a case study in the Bay of Algeciras (Spain)

    Stochastic Environmental Research and Risk Assessment, Vol. 33, Núm. 3, pp. 801-815

  2. Assessment of mechanical properties of concrete using electric arc furnace dust as an admixture

    CMMOST 2019: 5TH INTERNATIONAL CONFERENCE ON MECHANICAL MODELS IN STRUCTURAL ENGINEERING (CMMOST 2019)

  3. Estimation of NO2 concentration values in a monitoring sensor network using a fusion approach

    Fresenius Environmental Bulletin, Vol. 28, Núm. 2, pp. 681-686

  4. Mechanical-strength characteristics of concrete made with stainless steel industry wastes as binders

    Construction and Building Materials, Vol. 204, pp. 675-683

  5. Slag substitution as a cementing material in concrete: Mechanical, physical and environmental properties

    Materials, Vol. 12, Núm. 18

  6. Study of the suitability of different types of slag and its influence on the quality of green grouts obtained by partial replacement of cement

    Materials, Vol. 12, Núm. 7

2018

  1. Concrete properties comparison when substituting a 25% cement with slag from different provenances

    Materials, Vol. 11, Núm. 6

  2. Corrections in numerical methodology to evaluate plasticity induced crack closure along the thickness

    Theoretical and Applied Fracture Mechanics, Vol. 97, pp. 215-223

  3. Guide for the design and calculation of via ferrata

    International Journal of Mechanical Engineering and Technology, Vol. 9, Núm. 8, pp. 264-276

2017

  1. Prediction of carbon monoxide (CO) atmospheric pollution concentrations using meterological variables

    WIT Transactions on Ecology and the Environment, Vol. 211, pp. 137-145