Publicaciones en las que colabora con María José Cano Iglesias (16)

2012

  1. Protection by thermal and chemical activation with cerium salts of the alloy AA2017 in aqueous solutions of NaCl

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 43, Núm. 1, pp. 182-194

2010

  1. Preliminary study of the influence of machining conditions in the response to corrosion of UNS-A92024 alloy

    Advanced Materials Research

2009

  1. Behaviour of the alloy AA2017 in aqueous solutions of NaCl. Part I: Corrosion mechanisms

    Corrosion Science, Vol. 51, Núm. 3, pp. 518-524

2008

  1. Influencia de la geometría de una herramienta en la determinación de parámetros de corte. Aplicación al mecanizado de la aleación Al-Cu UNS A92024

    Anales de Ingeniería Mecánica, Vol. 16, pp. 455-461

  2. Using EIS to analyse samples of Al-Mg alloy AA5083 treated by thermal activation in cerium salt baths

    Corrosion Science, Vol. 50, Núm. 5, pp. 1376-1384

2006

  1. Dry drilling of fiber metal laminates CF/AA2024. A preliminary study

    Materials Science Forum

2004

  1. Advanced generation of green conversion coatings for aluminium alloys

    Applied Surface Science

  2. Comportamiento anticorrosivo de pinturas de base agua aplicadas en aceros

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 43, Núm. 2, pp. 209-211

  3. Lifetime prediction of waterborne acrylic paints with the AC-DC-AC method

    Progress in Organic Coatings, Vol. 49, Núm. 3, pp. 275-281

2003

  1. Combination of thermal activation and addition of H2O 2 to improve cerium-based immersion treatment of alloy AA5083

    Materials and Corrosion, Vol. 54, Núm. 2, pp. 77-83

  2. Degradation mechanism of an acrylic water-based paint applied to steels

    Progress in Organic Coatings, Vol. 47, Núm. 2, pp. 164-168

  3. Influence of the cathodic intermetallics distribution on the reproducibility of the electrochemical measurements on AA5083 alloy in NaCl solutions

    Corrosion Science, Vol. 45, Núm. 1, pp. 161-180

2002

  1. High protective, environmental friendly and short-time developed conversion coatings for aluminium alloys

    Applied Surface Science, Vol. 189, Núm. 1-2, pp. 162-173

  2. On the mixed nature of cerium conversion coatings

    Materials and Corrosion, Vol. 53, Núm. 3, pp. 176-184

2001

  1. Inhibition of the corrosion process of alloy AA5083 (Al-Mg) in seawater by cerium cations. An EIS study

    Werkstoffe und Korrosion, Vol. 52, Núm. 5, pp. 344-350

  2. Localized alkaline corrosion of alloy AA5083 in neutral 3.5% NaCl solution

    Corrosion Science, Vol. 43, Núm. 9, pp. 1657-1674