Turned Aluminium Alloys Surface Finish Monitoring through Cutting Force Measurements

  1. Sebastian, M.A. 1
  2. Sánchez-Sola, J.M. 1
  3. González, J.M. 2
  4. Carrilero, M.S. 2
  5. Alvarez, M. 2
  6. Marcos, M. 2
  1. 1 Departamento de Ingenieria Mecanicay Diseno Industrial. Universidad de Cadiz. Escuela Superior de Ingenieria. c/Chile s/n, E-11003, Cadiz, SPAIN.
  2. 2 Departamento de Ingeniería Mecánica y Diseño Industrial. Universidad de Cádiz. Escuela Superior de Ingeniería. c/Chile s/n, E-11003, Cádiz, SPAIN.
Revista:
Journal for Manufacturing Science and Production

ISSN: 2191-0375,  0793-6648

Ano de publicación: 2002

Volume: 4

Número: 4

Páxinas: 211-220

Tipo: Artigo

DOI: 10.1515/IJMSP.2002.4.4.211 GOOGLE SCHOLAR lock_openAcceso aberto editor

Outras publicacións en: Journal for Manufacturing Science and Production

Resumo

Surface finish is one of the most commonly used criteria to evaluate the machinability degree of metallic materials. However, surface quality evaluation requires the application of off-line measurement techniques, which involve time-outs in the production system. Thereby, it would be highly desirable to design experimental devices that allow monitoring on-line of the surface finish of the machined parts. In this work, a potential relation between surface roughness and the tangential component of the cutting force has been established for the dry turning process of UNS A92024 alloy. From this relation, the surface quality of the turned aluminium parts can be monitored through the cutting force values recorded on-line during the machining process.

Referencias bibliográficas

  • Carrilero M.S., (1996), J. Mech. Beh. Mater, 7, pp. 167, 10.1515/JMBM.1996.7.3.167
  • Carrilero M.S., J. Mech. Beh. Mater, 7
  • Andreasen J.L., (1993), CIRP, 42, pp. 45, 10.1016/S0007-8506(07)62388-9
  • Carrilero M.S., (2002), Manuf., 42, pp. 559