Publicaciones en las que colabora con MARIANO MARCOS BARCENA (100)

2018

  1. Experimental study of macro and microgeometric defects in drilled carbon fiber reinforced plastics by laser beam machining

    Materials, Vol. 11, Núm. 8

2017

  1. Analysis of secondary adhesion tool wear effects on surface roughness in dry turning process of UNS A92024 aluminium alloy

    International Journal of Mechatronics and Manufacturing Systems, Vol. 10, Núm. 1, pp. 23-39

  2. Assessment of engineered surfaces roughness by high-resolution 3D SEM photogrammetry

    Ultramicroscopy, Vol. 177, pp. 106-114

  3. Diseño conceptual de un equipo portátil de corte ortogonal

    Comunicaciones presentadas al XXI Congreso Internacional de Ingeniería de Proyectos: celebrado en Cádiz del 12 al 14 de julio de 2017

  4. FEM based evaluation of Fused Layer Modelling monolayers in tensile testing

    Procedia Manufacturing, Vol. 13, pp. 916-923

  5. Preliminary study of PLA wire colour effects on geometric characteristics of parts manufactured by FDM

    Procedia Manufacturing, Vol. 13, pp. 924-931

  6. Preliminary study of the dry drilling process of CFRP/UNS A92024 stacks held together by adhesives

    Procedia Manufacturing, Vol. 13, pp. 211-218

  7. Propuesta metodológica para la realización de proyectos en el sector naval en el ámbito de la industria 4.0

    Comunicaciones presentadas al XXI Congreso Internacional de Ingeniería de Proyectos: celebrado en Cádiz del 12 al 14 de julio de 2017

  8. Sliding wear behavior of UNS R56400 titanium alloy samples thermally oxidized by laser

    Materials, Vol. 10, Núm. 7, pp. 830

  9. Thermal laser oxidation based texturing as finishing treatment for improving surface properties of UNS R56400

    Procedia Manufacturing, Vol. 13, pp. 372-379

  10. Tool-path effect on the geometric deviations in the machining of UNS A92024 aeronautic skins

    Procedia Manufacturing, Vol. 13, pp. 639-646

  11. Trabajos fin de grado y la norma UNE 157001: Un reto educativo

    Comunicaciones presentadas al XXI Congreso Internacional de Ingeniería de Proyectos: celebrado en Cádiz del 12 al 14 de julio de 2017

  12. Virtual improvement of a historical aircraft assembly line

    Procedia Manufacturing, Vol. 13, pp. 1312-1319

2016

  1. A single students’ experience for visualizing completely a semester subject

    Materials Science Forum

  2. An analysis of geometrical models for evaluating the influence of feed rate on the roughness of dry turned UNS A92050 (Al-Cu-Li) alloy

    Advances in Materials and Processing Technologies, Vol. 2, Núm. 4, pp. 578-589

  3. Estudio Preliminar del Rendimiento Funcional de piezas fabricadas por FDM

    XXI Congreso Nacional de Ingeniería Mecánica

  4. Methodology for the Study of the Quality of CFRP Dry Drilling Based on Macrogeometrical and Dimensional Deviations

    World Journal of Engineering and Technology, Vol. 04, Núm. 03, pp. 200-205

  5. Preface

    Materials Science Forum

  6. Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens

    Advances in Materials Science and Engineering, Vol. 2016

2015

  1. 3D-FEM Based Methodology for Analysing Contour Milling Processes of Ti Alloys

    Procedia Engineering