MOISES
BATISTA PONCE
Profesor Titular de Universidad
SEVERO RAUL
FERNANDEZ VIDAL
Profesor Contratado Doctor
Publications by the researcher in collaboration with SEVERO RAUL FERNANDEZ VIDAL (23)
2020
-
On the machinability of an Al-63%SiC metal matrix composite
Materials, Vol. 13, Núm. 5
-
State of the art of the fused deposition modeling using PLA: Improving the performance
Additive and Subtractive Manufacturing: Emergent Technologies (De Gruyter), pp. 59-112
2019
-
Experimental study of laser texturing processes on the lubricant retention of carbide (WC-Co) surfaces
Key Engineering Materials
-
Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts
Rapid Prototyping Journal, Vol. 26, Núm. 3, pp. 585-592
-
Impact of chemical post-processing in fused deposition modelling (FDM) on polylactic acid (PLA) surface quality and structure
Polymers, Vol. 11, Núm. 3
-
Study of the one-shot drilling of CFRP/Ti6Al4V stacks with a double tip angle cutting-tool geometry
AIP Conference Proceedings
2018
-
A comparison of macro and microgeometrical properties of specimens made with a fdm commercial printer and its opensource retrofit version
Annals of DAAAM and Proceedings of the International DAAAM Symposium
-
Effects of laser microtexturing on the wetting behavior of Ti6Al4V alloy
Coatings, Vol. 8, Núm. 4
-
Experimental parametric model for adhesion wear measurements in the dry turning of an AA2024 alloy
Materials, Vol. 11, Núm. 9
-
Post-procesado de piezas en PLA tras su fabricación aditiva por deposición fundida (FDM)
Revista DYNA, Vol. 93, Núm. 6, pp. 625-629
-
Tool wear mechanism in cutting of stack CFRP/UNS A97075
Materials, Vol. 11, Núm. 8
2017
-
Preface
Materials Science Forum
-
Trabajos fin de grado y la norma UNE 157001: Un reto educativo
Comunicaciones presentadas al XXI Congreso Internacional de Ingeniería de Proyectos: celebrado en Cádiz del 12 al 14 de julio de 2017
2016
-
A single students’ experience for visualizing completely a semester subject
Materials Science Forum
-
Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens
Advances in Materials Science and Engineering, Vol. 2016
2015
-
Microgeometrical Deviations based Study of CFRP Drilled-holes
Procedia Engineering
-
Preliminary Design and Analysis of Tensile Test Samples Developed by Additive Manufacturing
Procedia Engineering
-
Preliminary study of the influence of manufacturing parameters in fused deposition modeling
Annals of DAAAM and Proceedings of the International DAAAM Symposium
-
Reverse Engineering Based Methodology for Modelling Cutting Tools
Procedia Engineering
2014
-
CUTTING SPEED AND FEEDRATE BASED ANALYSIS OF CUTTING FORCES IN THE ONE SHOT DRILLING (OSD) OF CFRC/AL HYBRID STACKS
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B