Publicacions (52) Publicacions de GUSTAVO AURELIO CIFREDO CHACON

2021

  1. Optimized preparation of washcoated clay honeycomb monoliths as support of manganese catalysts for acetone total combustion

    Microporous and Mesoporous Materials, Vol. 310

2018

  1. Low temperature prepared copper-iron mixed oxides for the selective CO oxidation in the presence of hydrogen

    Applied Catalysis A: General, Vol. 552, pp. 58-69

2017

  1. Use of pillared clays in the preparation of washcoated clay honeycomb monoliths as support of manganese catalysts for the total oxidation of VOCs

    Catalysis Today, Vol. 296, pp. 84-94

2016

  1. Carbon integral honeycomb monoliths as support of copper catalysts in the Kharasch-Sosnovsky oxidation of cyclohexene

    Chemical Engineering Journal, Vol. 290, pp. 174-184

  2. Natural clays for CO2 sequestration: study in the form of powder as previous stage before their use in structured filters.

    International Journal of Latest Research in Engineering and Technology, Vol. 2, Núm. 11, pp. 6-14

2015

  1. Clay honeycomb monoliths as support of manganese catalysts for VOCs oxidation

    4th International Renewable Energy and Environment Conference

  2. Unveiling the source of activity of carbon integral honeycomb monoliths in the catalytic methane decomposition reaction

    Catalysis Today, Vol. 249, pp. 86-93

2014

  1. A novel CoOx/La-modified-CeO2 formulation for powdered and washcoated onto cordierite honeycomb catalysts with application in VOCs oxidation

    Applied Catalysis B: Environmental, Vol. 144, pp. 425-434

  2. Experimental evidences of the relationship between reducibility and micro- and nanostructure in commercial high surface area ceria

    Applied Catalysis A: General, Vol. 479, pp. 35-44

  3. Structural changes in ZrOxNy/ZrO2 coatings deposited through spray pyrolisis-nitriding

    Revista Mexicana de Fisica, Vol. 60, Núm. 3, pp. 233-242

2013

  1. Corrigendum to: Towards biofuel combustion with an easily extruded clay as a natural catalyst [Appl. Energy 107 (2013) 149-156]

    Applied Energy

  2. Producción y caracterización de películas de óxido de circonio por espray pirólisis

    Revista Latinoamericana de Metalurgia y Materiales, Vol. 33, Núm. 1, pp. 116-130

  3. Resistance to corrosion of zirconia coatings deposited by spray pyrolysis in nitrided steel

    Journal of Thermal Spray Technology, Vol. 22, Núm. 7, pp. 1242-1252

2012

  1. Effect of different alumina dopants on the redox deactivation produced by structural modifications on CePrO x/Al 2O 3 systems

    Catalysis Today, Vol. 180, Núm. 1, pp. 184-189

2010

  1. Easy route to activate clay honeycomb monoliths for environmental applications

    Applied Clay Science, Vol. 47, Núm. 3-4, pp. 392-399

  2. Influence of the calcination temperature on the nano-structural properties, surface basicity, and catalytic behavior of alumina-supported lanthana samples

    Journal of Catalysis, Vol. 272, Núm. 1, pp. 121-130

2009

  1. Easy extrusion of honeycomb-shaped monoliths using Moroccan natural clays and investigation of their dynamic adsorptive behavior towards VOCs

    Journal of Hazardous Materials, Vol. 170, Núm. 1, pp. 87-95

2008

  1. Actual constitution of the mixed oxide promoter in a Rh/Ce 1-xPrxO2-y/Al2O3 catalyst. Evolution throughout the preparation steps

    Surface and Interface Analysis

  2. Original carbon-based honeycomb monoliths as support of Cu or Mn catalysts for low-temperature SCR of NO: Effects of preparation variables

    Applied Catalysis A: General, Vol. 342, Núm. 1-2, pp. 150-158

2007

  1. Physicochemical characterization and adsorptive properties of some Moroccan clay minerals extruded as lab-scale monoliths

    Applied Clay Science, Vol. 36, Núm. 4, pp. 287-296