Rafel Ernesto González Palma-rekin lankidetzan egindako argitalpenak (8)

2022

  1. Análisis de la tenacidad a la fractura en la zona afectada por el calor (ZAC) de un acero HSLA

    Revista DYNA, Vol. 97, Núm. 5, pp. 543-548

2015

  1. Analysis of the glass-crystal transformation kinetics by means of the theoretical method developed (TMD) under both non-isothermal and isothermal regimes. Application to the crystallization of the Ag0.16As0.34Se0.50 glassy alloy

    Journal of Alloys and Compounds, Vol. 622, pp. 610-617

2013

  1. An extension to isothermal processes of the theoretical method developed (TMD) to analyze the glass-crystal transformation kinetics by differential scanning calorimetry. Application to the crystallization of the Sb 0.16As0.22Se0.62 glassy alloy

    Journal of Alloys and Compounds, Vol. 581, pp. 679-684

2012

  1. A study on the glass-crystal transformation under non-isothermal regime: Evaluation of the crystallization kinetics of the Ag 0.24As 0.30Se 0.46 glassy semiconductor by using the theoretical method developed (TMD) and a model-fitting approach

    Journal of Alloys and Compounds, Vol. 544, pp. 188-196

2011

  1. An integral method to analyze the glass-crystal transformation kinetics by differential scanning calorimetry under nonisothermal regime. Application to the crystallization of the Ge0.08Sb0.15Se0.77 chalcogenide glass

    Journal of Materials Science, Vol. 46, Núm. 15, pp. 5267-5277

  2. Relaciones causales en el modelo europeo de excelencia

    Revista DYNA, Vol. 86, Núm. 6, pp. 656-661

2010

  1. On the glass-crystal transformation kinetics in materials which fulfil the conditions of "site saturation". Application to the crystallization of some alloys of Sb-As-Se and Ge-Sb-Se glassy systems

    Journal of Materials Science, Vol. 45, Núm. 11, pp. 2974-2982

2006

  1. Procesos metalúrgicos de aceros microaleados de alta resistencia 450 EMZ tipo II en la zona afectada térmicamente debido al efecto multipasada en soldaduras por arco sumergido

    Revista de metalurgia, Vol. 42, Núm. 4, pp. 256-269