Publications dans lesquelles il/elle collabore avec LEANDRO GONZALEZ ROVIRA (13)

2023

  1. Effect of the heat treatment on the mechanical properties and microstructure of Scalmalloy® manufactured by Selective Laser Melting (SLM) under certified conditions

    Materials Characterization, Vol. 196

  2. Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties

    Journal of Materials Research and Technology, Vol. 25, pp. 4409-4424

  3. Localized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusion

    Corrosion Science, Vol. 218

2022

  1. Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

    Corrosion Science, Vol. 201

2021

  1. A review on the abrasive water-jet machining of metal–carbon fiber hybrid materials

    Metals, Vol. 11, Núm. 1, pp. 1-29

  2. Study of the influence of laser energy density on the surface roughness of Scalmalloy<sup>®</sup> samples manufactured by DMLS technology

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012036

  3. Study of the influence of laser energy density on the surface roughness of Scalmalloy® samples manufactured by DMLS technology

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2017

  1. Assessment of engineered surfaces roughness by high-resolution 3D SEM photogrammetry

    Ultramicroscopy, Vol. 177, pp. 106-114

  2. Topological optimization and manufacturing by Direct Metal Laser Sintering of an aeronautical part in 15-5PH stainless steel

    Procedia Manufacturing, Vol. 13, pp. 818-824

2012

  1. Protection by thermal and chemical activation with cerium salts of the alloy AA2017 in aqueous solutions of NaCl

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 43, Núm. 1, pp. 182-194

2009

  1. Behaviour of the alloy AA2017 in aqueous solutions of NaCl. Part I: Corrosion mechanisms

    Corrosion Science, Vol. 51, Núm. 3, pp. 518-524

2008

  1. Using EIS to analyse samples of Al-Mg alloy AA5083 treated by thermal activation in cerium salt baths

    Corrosion Science, Vol. 50, Núm. 5, pp. 1376-1384

2005

  1. Empleo del método electroquímico acelerado AC-DC-AC para la predicción del tiempo de vida útil de pinturas base agua

    Revista de metalurgia, Vol. 41, Núm. 0, pp. 374-378