FRANCISCO JAVIER BOTANA PEDEMONTE-rekin lankidetzan egindako argitalpenak (62)

2023

  1. Effect of the heat treatment on the mechanical properties and microstructure of Scalmalloy® manufactured by Selective Laser Melting (SLM) under certified conditions

    Materials Characterization, Vol. 196

  2. Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties

    Journal of Materials Research and Technology, Vol. 25, pp. 4409-4424

  3. Localized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusion

    Corrosion Science, Vol. 218

  4. Study of dose dependence on density in planar 3D-printed applicators for HDR Ir192 surface brachytherapy

    Brachytherapy, Vol. 22, Núm. 2, pp. 250-259

2022

  1. Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

    Corrosion Science, Vol. 201

2021

  1. 3D-printing of metallic honeycomb monoliths as a doorway to a new generation of catalytic devices: the Ni-based catalysts in methane dry reforming showcase

    Catalysis Communications, Vol. 148

  2. Study of the influence of laser energy density on the surface roughness of Scalmalloy<sup>®</sup> samples manufactured by DMLS technology

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012036

  3. Study of the influence of laser energy density on the surface roughness of Scalmalloy® samples manufactured by DMLS technology

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2018

  1. Effects of laser processing parameters on texturized layer development and surface features of Ti6Al4V alloy samples

    Coatings, Vol. 8, Núm. 1

2017

  1. A paperless based methodology for managing Quality Control. Application to a I+D+i Supplier Company

    Procedia Manufacturing, Vol. 13, pp. 1066-1073

  2. Microstructure and mechanical properties of Ti5553 butt welds performed by LBW under conduction regime

    Metals, Vol. 7, Núm. 7

  3. Sliding wear behavior of UNS R56400 titanium alloy samples thermally oxidized by laser

    Materials, Vol. 10, Núm. 7, pp. 830

  4. Thermal laser oxidation based texturing as finishing treatment for improving surface properties of UNS R56400

    Procedia Manufacturing, Vol. 13, pp. 372-379

  5. Topological optimization and manufacturing by Direct Metal Laser Sintering of an aeronautical part in 15-5PH stainless steel

    Procedia Manufacturing, Vol. 13, pp. 818-824

2014

  1. Tribological wear analysis of laser surface treated Ti6Al4V based on volume lost evaluation

    Key Engineering Materials

2013

  1. Metrological evaluation of the tribological behavior of laser surface treated Ti6Al4V alloy

    Procedia Engineering

2012

  1. Protection by thermal and chemical activation with cerium salts of the alloy AA2017 in aqueous solutions of NaCl

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 43, Núm. 1, pp. 182-194

2010

  1. Preliminary study of the influence of machining conditions in the response to corrosion of UNS-A92024 alloy

    Advanced Materials Research

2009

  1. Behaviour of the alloy AA2017 in aqueous solutions of NaCl. Part I: Corrosion mechanisms

    Corrosion Science, Vol. 51, Núm. 3, pp. 518-524

2008

  1. Using EIS to analyse samples of Al-Mg alloy AA5083 treated by thermal activation in cerium salt baths

    Corrosion Science, Vol. 50, Núm. 5, pp. 1376-1384