Instituto de Microscopía Electrónica y Materiales (IMEYMAT)
Forschungsinstitut
FRANCISCO JAVIER
DELGADO GONZALEZ
Forscher in der Zeit 2012-2019
Publikationen, an denen er mitarbeitet FRANCISCO JAVIER DELGADO GONZALEZ (28)
2024
2023
-
Manufacture and Characterization of Polylactic Acid Filaments Recycled from Real Waste for 3D Printing
Polymers, Vol. 15, Núm. 9
-
Polymer nanocomposites for plasmonics: In situ synthesis of gold nanoparticles after additive manufacturing
Polymer Testing, Vol. 117
2022
-
Basalt Fiber Composites with Reduced Thermal Expansion for Additive Manufacturing
Polymers, Vol. 14, Núm. 15
-
Development of polymeric composite materials and prototypes with cork for large format additive manufacturing
Revista de Materiales Compuestos
-
Effect of Thermal and Hydrothermal Accelerated Aging on 3D Printed Polylactic Acid
Polymers, Vol. 14, Núm. 23
-
Induced damage during STEM-EELS analyses on acrylic-based materials for Stereolithography
Polymer Degradation and Stability, Vol. 203
-
Influencia de la incorporación de corcho microparticulado en materiales poliméricos especialmente orientados a Fabricación Aditiva de Gran Formato
XVI Congreso Nacional de Materiales, XVI CNMAT2022
-
Printable Graphene Oxide Nanocomposites as Versatile Platforms for Immobilization of Functional Biomolecules
Macromolecular Materials and Engineering, Vol. 307, Núm. 3
-
Stereolithography of Semiconductor Silver and Acrylic-Based Nanocomposites
Polymers, Vol. 14, Núm. 23
-
Synthesis and Characterisation of ASA-PEEK Composites for Fused Filament Fabrication
Polymers, Vol. 14, Núm. 3
-
Synthesis and characterization of enhanced conductivity acrylonitrile-butadiene-styrene based composites suitable for fused filament fabrication
Polymer Composites, Vol. 43, Núm. 9, pp. 6611-6623
-
Synthesis of Silver Nanocomposites for Stereolithography: In Situ Formation of Nanoparticles
Polymers, Vol. 14, Núm. 6
2021
-
Additive manufacturing of gold nanostructures using nonlinear photoreduction under controlled ionic diffusion
International Journal of Molecular Sciences, Vol. 22, Núm. 14
2020
-
Development of carbon fiber acrylonitrile styrene acrylate composite for large format additive manufacturing
Materials and Design, Vol. 191
-
Synthesis and characterisation of acrylic Resin-al powder composites suitable for additive manufacturing
Polymers, Vol. 12, Núm. 8
2019
-
Structural characterization of bulk and nanoparticle lead halide perovskite thin films by (S)TEM techniques
Nanotechnology, Vol. 30, Núm. 13
2018
-
Geometric-Structural Study of the Accelerated Degradation of Mold Cavities for HDPE Injection
Journal of Failure Analysis and Prevention, Vol. 18, Núm. 1, pp. 55-65
2017
-
Effect of annealing on the compositional modulation of InAlAsSb
Applied Surface Science, Vol. 395, pp. 105-109
-
Structural characterization of InAlAsSb/InGaAs/InP heterostructures for solar cells
Applied Surface Science, Vol. 395, pp. 98-104