Publicaciones (94) Publicaciones en las que ha participado algún/a investigador/a

2013

  1. Influence of RF-sputtering power on formation of vertically stacked Si 1-x Ge x nanocrystals between ultra-thin amorphous Al 2 O 3 layers: Structural and photoluminescence properties

    Journal of Physics D: Applied Physics, Vol. 46, Núm. 38

  2. A novel TiO 2 -SiO 2 nanocomposite converts a very friable stone into a self-cleaning building material

    Applied Surface Science

  3. Quantification of In x Ga 1-x P composition modulation by nanometric scale HAADF simulations

    Applied Surface Science

  4. 2D and 3D characterization of a surfactant-synthesized TiO 2-SiO2 mesoporous photocatalyst obtained at ambient temperature

    Physical Chemistry Chemical Physics, Vol. 15, Núm. 8, pp. 2800-2808

  5. A review of MBE grown 0D, 1D and 2D quantum structures in a nanowire

    Journal of Materials Chemistry C, Vol. 1, Núm. 28, pp. 4300-4312

  6. A route for the synthesis of Cu-doped TiO2 nanoparticles with a very low band gap

    Chemical Physics Letters, Vol. 571, pp. 49-53

  7. Bandgap engineering in a nanowire: Self-assembled 0, 1 and 2D quantum structures

    Materials Today, Vol. 16, Núm. 6, pp. 213-219

  8. Boron concentration profiling by high angle annular dark field-scanning transmission electron microscopy in homoepitaxial δ-doped diamond layers

    Applied Physics Letters, Vol. 103, Núm. 4

  9. Characterization of active sites/entities and redox/catalytic correlations in copper-ceria-based catalysts for preferential oxidation of CO in H2-rich streams

    Catalysts, Vol. 3, Núm. 2, pp. 378-400

  10. Clay honeycomb monoliths for water purification: Modulating methylene blue adsorption through controlled activation via natural coal templating

    Applied Surface Science, Vol. 277, pp. 242-248

  11. Combined (S)TEM-FIB insight into the influence of the preparation method on the final surface structure of a Co3O4/La-modified- CeO2 washcoated monolithic catalyst

    Journal of Physical Chemistry C, Vol. 117, Núm. 25, pp. 13028-13036

  12. Comparison of Ti-5Al-5V-5Mo-3Cr welds performed by laser beam, electron beam and gas tungsten arc welding

    Procedia Engineering

  13. Compositional analysis of InAs-GaAs-GaSb heterostructures by low-loss electron energy loss spectroscopy

    Journal of Physics: Conference Series

  14. Continuous production of iron-based nanocrystals by laser pyrolysis. Effect of operating variables on size, composition and magnetic response

    Nanotechnology, Vol. 24, Núm. 32

  15. Control of the chemistry outside the pores in honeycomb patterned films

    Polymer Chemistry, Vol. 4, Núm. 14, pp. 4024-4032

  16. Corrigendum to: Towards biofuel combustion with an easily extruded clay as a natural catalyst [Appl. Energy 107 (2013) 149-156]

    Applied Energy

  17. Design considerations for tailoring the thickness profile of transparent dielectric deposits by continuous-wave laser deposition

    Journal of Applied Physics, Vol. 113, Núm. 1

  18. Diamond underlayer microstructure effect on the orientation of AlN piezoelectric layers for high frequency SAW resonators by TEM

    Microelectronic Engineering, Vol. 112, pp. 193-197

  19. Differential conductance of Pd-ZrO2 thin granular films prepared by RF magnetron sputtering

    EPL, Vol. 104, Núm. 1

  20. DoE (Design of Experiments) assisted allylic hydroxylation of enones catalysed by a copper-aluminium mixed oxide

    European Journal of Organic Chemistry, pp. 8307-8314