Green Sorption Materials Used in Analytical Procedures

  1. López-Iglesias, David
  2. Sierra-Padilla, Alfonso
  3. Palacios-Santander, José María
  4. Cubillana-Aguilera, Laura
  5. García-Guzmán, Juan José
  1. 1 Universidad de Cádiz
    info

    Universidad de Cádiz

    Cádiz, España

    ROR https://ror.org/04mxxkb11

Libro:
Green Chemical Analysis and Sample Preparations

ISBN: 9783030965334,  9783030965341

Año de publicación: 2022

Páginas: 101-169

Tipo: Capítulo de Libro

DOI: 10.1007/978-3-030-96534-1_3 GOOGLE SCHOLAR lock_openAcceso abierto editor

Resumen

The development of green analytical procedures for the monitoring of several sample features is demanded by the general society and is an interesting topic investigated by the scientific community.The use of green sorbents for sampling diverse compounds before analysis in different foodstuffs, gas samples, water, and/or pharmaceutical tablets is considered as an environmentally friendly procedure. Reliable results after analysis can be obtained in a short span of time, using simple and online experimental set-ups. In this sense, several materials are briefly covered in this chapter, reporting an extensive literature. Finally, future perspectives are discussed.

Referencias bibliográficas

  • Abd Rahim, M. et al. (2016) ‘New Sol–Gel Hybrid Material in Solid Phase Extraction Combined with Liquid Chromatography for the Determination of Non-steroidal Anti-inflammatory Drugs in Water Samples’, Chromatographia, 79, pp. 421–429. doi: https://doi.org/10.1007/s10337-016-3059-3.
  • Abdi Hassan, A. et al. (2020) ‘Ionic liquid-based membrane-protected micro-solid-phase extraction of organochlorine pesticides in environmental water samples’, Microchemical Journal. Elsevier, 158, p. 105295. doi: https://doi.org/10.1016/j.microc.2020.105295.
  • Abdullah, U. et al. (2018) ‘Micro-solid phase extraction (μ-SPE) based on alginate/multi-walled carbon nanotubes sorbent for the determination of bisphenol a in canned fruits’, Chiang Mai Journal of Science, 45(6), pp. 2348–2360.
  • Abu, N. et al. (2018) ‘Science of the Total Environment Molecularly imprinted polymer for the removal of diclofenac from water: Synthesis and characterization’, Science of the Total Environment. Elsevier B.V., 631–632, pp. 1534–1543. doi: https://doi.org/10.1016/j.scitotenv.2018.03.087.
  • Abujaber, F. et al. (2018) ‘Magnetic cellulose nanoparticles coated with ionic liquid as a new material for the simple and fast monitoring of emerging pollutants in waters by magnetic solid phase extraction’, Microchemical Journal, 137, pp. 490–495. doi: https://doi.org/10.1016/j.microc.2017.12.007.
  • Abujaber, F. et al. (2019a) ‘Simultaneous extraction and preconcentration of monomethylmercury and inorganic mercury using magnetic cellulose nanoparticles’, Microchimica Acta. 186(7), p. 400. doi: https://doi.org/10.1007/s00604-019-3492-8.
  • Abujaber, F., Guzmán Bernardo, F. J. and Rodríguez Martín-Doimeadios, R. C. (2019b) ‘Magnetic cellulose nanoparticles as sorbents for stir bar-sorptive dispersive microextraction of polychlorinated biphenyls in juice samples’, Talanta. Elsevier B.V., 201(April), pp. 266–270. doi: https://doi.org/10.1016/j.talanta.2019.04.005.
  • Adelantado, C., Ríos, Á. and Zougagh, M. (2018) ‘Magnetic nanocellulose hybrid nanoparticles and ionic liquid for extraction of neonicotinoid insecticides from milk samples prior to determination by liquid chromatography-mass spectrometry’, Food Additives and Contaminants – Part A Chemistry, Analysis, Control, Exposure and Risk Assessment. Taylor & Francis, 35(9), pp. 1755–1766. doi: https://doi.org/10.1080/19440049.2018.1492156.
  • Aftafa, C. et al. (2014) ‘Ionic liquid intercalated clay sorbents for micro solid phase extraction of steroid hormones from water samples with analysis by liquid chromatography-tandem mass spectrometry’, Journal of Chromatography A, 1361, pp. 43–52. doi: https://doi.org/10.1016/j.chroma.2014.07.095.
  • Ahmad, H. et al. (2020) ‘Separation and preconcentration of arsenite and other heavy metal ions using graphene oxide laminated with protein molecules’, Journal of Hazardous Materials. Elsevier, 384(October 2019), p. 121479. doi: https://doi.org/10.1016/j.jhazmat.2019.121479.
  • Ahmad, H., Cai, C. and Liu, C. (2019a) ‘Separation and preconcentration of Pb(II) and Cd(II) from aqueous samples using hyperbranched polyethyleneimine-functionalized graphene oxide-immobilized polystyrene spherical adsorbents’, Microchemical Journal. Elsevier, 145(September 2018), pp. 833–842. doi: https://doi.org/10.1016/j.microc.2018.11.032.
  • Ahmad, M. et al. (2019b) ‘Engineered biochar composites with zeolite, silica, and nano-zerovalent iron for the efficient scavenging of chlortetracycline from aqueous solutions’, Environmental Science and Pollution Research. 26(15), pp. 15136–15152. doi: https://doi.org/10.1007/s11356-019-04850-7.
  • Ahmadi, M., Es, Z. and Sarafraz-yazdi, A. (2012) ‘Design, synthesis and evaluation of a molecularly imprinted polymer for hollow fiber – solid phase microextraction of chlorogenic acid in medicinal plants’, Journal of Chromatography A. Elsevier B.V., 1229, pp. 24–29. doi: https://doi.org/10.1016/j.chroma.2012.01.019.
  • Aichour, A. and Zaghouane-Boudiaf, H. (2019) ‘Highly brilliant green removal from wastewater by mesoporous adsorbents: Kinetics, thermodynamics and equilibrium isotherm studies’, Microchemical Journal, 146, pp. 1255–1262. doi: https://doi.org/10.1016/j.microc.2019.02.040.
  • Van Aken, K., Strekowski, L. and Patiny, L. (2006) ‘EcoScale, a semi-quantitative tool to select an organic preparation based on economical and ecological parameters’, Beilstein Journal of Organic Chemistry, 2, p. 3. doi: https://doi.org/10.1186/1860-5397-2-3.
  • Al-Saidi, H. M. and El-Shahawi, M. S. (2020) ‘An innovative platform exploiting solid microcrystalline cellulose for selective separation of bromate species in drinking water: Preparation, characterization, kinetics and thermodynamic study’, Microchemical Journal. Elsevier B.V., 159(September), p. 105510. doi: https://doi.org/10.1016/j.microc.2020.105510.
  • Alampanos, V. et al. (2019) ‘Fabric phase sorptive extraction for simultaneous observation of four penicillin antibiotics from human blood serum prior to high performance liquid chromatography and photo-diode array detection’, Microchemical Journal. Elsevier, 149(May), p. 103964. doi: https://doi.org/10.1016/j.microc.2019.103964.
  • Alampanos, V. et al. (2020) ‘Fabric phase sorptive extraction combined with high-performance-liquid chromatography-photodiode array analysis for the determination of seven parabens in human breast tissues: Application to cancerous and non-cancerous samples’, Journal of Chromatography A, 1630. doi: https://doi.org/10.1016/j.chroma.2020.461530.
  • Alheety, M. A. et al. (2019) ‘Eco-friendly C60-SESMP-Fe3O4 inorganic magnetizable nanocomposite as high-performance adsorbent for magnetic removal of arsenic from crude oil and water samples’, Materials Chemistry and Physics, 231(October 2018), pp. 292–300. doi: https://doi.org/10.1016/j.matchemphys.2019.04.040.
  • Alhooshani, K. (2019) ‘Determination of chlorinated hydrocarbons in milk samples using sol-gel based polymer coated silica sorbent for stir-bar supported micro-solid-phase extraction coupled with gas chromatography mass-spectrometry’, Journal of Saudi Chemical Society, 23, pp. 702–710. doi: https://doi.org/10.1016/j.jscs.2018.11.010.
  • Alipanahpour, E. et al. (2021) ‘Nano-sized Fe3O4@SiO2 -molecular imprinted polymer as a sorbent for dispersive solid-phase microextraction of melatonin in the methanolic extract of Portulaca oleracea, biological, and water samples’, Talanta. Elsevier B.V., 221, p. 121620. doi: https://doi.org/10.1016/j.talanta.2020.121620.
  • Alipour, F., Raoof, J. B. and Ghani, M. (2020) ‘Hierarchical zeolitic imidazolate framework-67 derived from in-situ synthesized CO-Al layered double hydroxide embedded within porous-anodized aluminum foil for thin film microextraction of caffeine followed by its high performance liquid chromatography-u’, Journal of Chromatography A. Elsevier B.V., 1626, p. 461358. doi: https://doi.org/10.1016/j.chroma.2020.461358.
  • Aliyari, E., Alvand, M. and Shemirani, F. (2016) ‘Modified surface-active ionic liquid-coated magnetic graphene oxide as a new magnetic solid phase extraction sorbent for preconcentration of trace nickel’, RSC Advances. Royal Society of Chemistry, 6(69), pp. 64193–64202. doi: https://doi.org/10.1039/c6ra04163a.
  • Almasoud, N. et al. (2020) ‘A solid phase extraction based uplc-esi-ms/ms method using surfactant-modified clay as extraction sorbent for the removal and determination of rhodamine b in industrial wastewater samples’, Desalination and Water Treatment, 195, pp. 222–231. doi: https://doi.org/10.5004/dwt.2020.25896.
  • Amiri, A. (2016) ‘Solid-phase microextraction-based sol-gel technique’, TrAC – Trends in Analytical Chemistry, 75, pp. 57–74. doi: https://doi.org/10.1016/j.trac.2015.10.003.
  • Amiri, A. et al. (2020a) ‘Graphene oxide/polydimethylsiloxane-coated stainless steel mesh for use in solid-phase extraction cartridges and extraction of polycyclic aromatic hydrocarbons’, Microchimica Acta. 187(4), p. 213. doi: https://doi.org/10.1007/s00604-020-4193-z.
  • Amiri, A., Baghayeri, M. and Vahdati-Nasab, N. (2020b) ‘Effective extraction of organophosphorus pesticides using sol–gel based coated stainless steel mesh as novel solid-phase extraction sorbent’, Journal of Chromatography A, 1620, p. 461020. doi: https://doi.org/10.1016/j.chroma.2020.461020.
  • Amiri, A. and Ghaemi, F. (2021) ‘Solid-phase extraction of non-steroidal anti-inflammatory drugs in human plasma and water samples using sol–gel-based metal-organic framework coating’, Journal of Chromatography A, 1648, p. 462168. doi: https://doi.org/10.1016/j.chroma.2021.462168.
  • Amiri, A., Ghaemi, F. and Maleki, B. (2019) ‘Hybrid nanocomposites prepared from a metal-organic framework of type MOF-199(Cu) and graphene or fullerene as sorbents for dispersive solid phase extraction of polycyclic aromatic hydrocarbons’, Microchimica Acta, 186, p. 131. doi: https://doi.org/10.1007/s00604-019-3246-7.
  • Amran, M. B. et al. (2020) ‘Bentonite-based functional material as preconcentration system for determination of chromium species in water by flow injection analysis technique’, Heliyon, 6, p. e04051. doi: https://doi.org/10.1016/j.heliyon.2020.e04051.
  • Andrade-Eiroa, A. et al. (2016) ‘Solid-phase extraction of organic compounds: A critical review (Part I)’, TrAC – Trends in Analytical Chemistry, 80, pp. 641–654. doi: https://doi.org/10.1016/j.trac.2015.08.015.
  • Ansari, S. and Masoum, S. (2018) ‘A multi-walled carbon nanotube-based magnetic molecularly imprinted polymer as a highly selective sorbent for ultrasonic-assisted dispersive solid-phase microextraction of sotalol in biological fluid’, Analyst. Royal Society of Chemistry, 143, pp. 2862–2875. doi: https://doi.org/10.1039/c7an02077e.
  • Arabi, M. et al. (2016) ‘Synthesis and application of molecularly imprinted nanoparticles combined ultrasonic assisted for highly selective solid phase extraction trace amount of celecoxib from human plasma samples using design expert (DXB) software’, Ultrasonics – Sonochemistry. Elsevier B.V., 33, pp. 67–76. doi: https://doi.org/10.1016/j.ultsonch.2016.04.022.
  • Arabi, M. et al. (2020) ‘Hydrophilic molecularly imprinted nanospheres for the extraction of rhodamine B followed by HPLC analysis: A green approach and hazardous waste elimination’, Talanta. Elsevier B.V., 215(December 2019), p. 120933. doi: https://doi.org/10.1016/j.talanta.2020.120933.
  • Armstrong, D. W., He, L. and Liu, Y. (1999) ‘Examination of Ionic Liquids and Their Interaction with Molecules, When Used as Stationary Phases in Gas Chromatography’, Anal. Chem., 71(17), pp. 3873–3876. doi: https://doi.org/10.1021/ac990443p.
  • Arnnok, P., Patdhanagul, N. and Burakham, R. (2017) ‘Dispersive solid-phase extraction using polyaniline-modified zeolite NaY as a new sorbent for multiresidue analysis of pesticides in food and environmental samples’, Talanta. Elsevier, 164(August 2016), pp. 651–661. doi: https://doi.org/10.1016/j.talanta.2016.11.003.
  • Asfaram, A. et al. (2020) ‘Magnetic Cu: CuO-GO nanocomposite for efficient dispersive micro-solid phase extraction of polycyclic aromatic hydrocarbons from vegetable, fruit, and environmental water samples by liquid chromatographic determination’, Talanta. Elsevier B.V., 218(March), p. 121131. doi: https://doi.org/10.1016/j.talanta.2020.121131.
  • Asiabi, M., Mehdinia, A. and Jabbari, A. (2017a) ‘Electrospun biocompatible Chitosan/MIL-101 (Fe) composite nanofibers for solid-phase extraction of Δ9-tetrahydrocannabinol in whole blood samples using Box-Behnken experimental design’, Journal of Chromatography A. Elsevier B.V., 1479, pp. 71–80. doi: https://doi.org/10.1016/j.chroma.2016.12.024.
  • Asiabi, M., Mehdinia, A. and Jabbari, A. (2017b) ‘Spider-web-like chitosan/MIL-68(Al) composite nanofibers for high-efficient solid phase extraction of Pb(II) and Cd(II)’, Microchimica Acta. 184(11), pp. 4495–4501. doi: https://doi.org/10.1007/s00604-017-2473-z.
  • Atarodi, A. et al. (2017) ‘Introduction of Fullerene as a New Carrier in Electromembrane Extraction for the Determination of Ibuprofen and Sodium Diclofenac as Model Acidic Drugs in Real Urine Samples’, Chromatographia. Springer Berlin Heidelberg, 80(6), pp. 881–890. doi: https://doi.org/10.1007/s10337-017-3295-1.
  • Azizi, A., Shahhoseini, F. and Bottaro, C. S. (2020) ‘Magnetic molecularly imprinted polymers prepared by reversible addition fragmentation chain transfer polymerization for dispersive solid phase extraction of polycyclic aromatic hydrocarbons in water’, Journal of Chromatography A. Elsevier B.V., 1610, p. 460534. doi: https://doi.org/10.1016/j.chroma.2019.460534.
  • Baby, R., Saifullah, B. and Hussein, M. Z. (2019) ‘Carbon Nanomaterials for the Treatment of Heavy Metal-Contaminated Water and Environmental Remediation’, Nanoscale Research Letters. Nanoscale Research Letters, 14(1), p. 341. doi: https://doi.org/10.1186/s11671-019-3167-8.
  • Baeza, A. N. et al. (2016) ‘Multiresidue analysis of cephalosporin antibiotics in bovine milk based on molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry’, Journal of Chromatography A. Elsevier B.V., 1474, pp. 121–129. doi: https://doi.org/10.1016/j.chroma.2016.10.069.
  • Bagheri, H., Piri-Moghadam, H. and Ahdi, T. (2012) ‘Role of precursors and coating polymers in sol-gel chemistry toward enhanced selectivity and efficiency in solid phase microextraction’, Analytica Chimica Acta, 742, pp. 45–53. doi: https://doi.org/10.1016/j.aca.2012.02.021.
  • Baile, P. et al. (2018) ‘A modified ZSM-5 zeolite/Fe2O3 composite as a sorbent for magnetic dispersive solid-phase microextraction of cadmium, mercury and lead from urine samples prior to inductively coupled plasma optical emission spectrometry’, Journal of Analytical Atomic Spectrometry, 33(5), pp. 856–866. doi: https://doi.org/10.1039/c7ja00366h.
  • Baile, P. et al. (2019) ‘Zeolites and zeolite-based materials in extraction and microextraction techniques’, Analyst. Royal Society of Chemistry, 144(2), pp. 366–387. doi: https://doi.org/10.1039/c8an01194j.
  • Baile, P. et al. (2020) ‘Determination of four bisphenols in water and urine samples by magnetic dispersive solid-phase extraction using a modified zeolite/iron oxide composite prior to liquid chromatography diode array detection’, Journal of Separation Science, 43(9–10), pp. 1808–1816. doi: https://doi.org/10.1002/jssc.201901022.
  • Bakas, I. et al. (2014) ‘Molecularly imprinted polymer cartridges coupled to high performance liquid chromatography (HPLC-UV) for simple and rapid analysis of fenthion in olive oil’, Talanta. Elsevier, 125, pp. 313–318. doi: https://doi.org/10.1016/j.talanta.2014.03.020.
  • Barahona, F. et al. (2011) ‘Synthesis of core-shell molecularly imprinted polymer microspheres by precipitation polymerization for the inline molecularly imprinted solid-phase extraction of thiabendazole from citrus fruits and orange juice samples’, Journal of Sep, 34, pp. 217–224. doi: https://doi.org/10.1002/jssc.201000277.
  • Barreiro, J. C. et al. (2015) ‘Recent approaches for on-line analysis of residues and contaminants in food matrices: A review †’, Journal of Separation Science, 38(10). doi: https://doi.org/10.1002/jssc.201401285.
  • Bartolucci, C. et al. (2020) ‘Green nanomaterials fostering agrifood sustainability’, TrAC Trends in Analytical Chemistry. Elsevier, 125, p. 115840. doi: https://doi.org/10.1016/J.TRAC.2020.115840.
  • Baysal, A., Kuznek, C. and Ozcan, M. (2018) ‘Starch coated titanium dioxide nanoparticles as a challenging sorbent to separate and preconcentrate some heavy metals using graphite furnace atomic absorption spectrometry’, International Journal of Environmental Analytical Chemistry. Taylor & Francis, 98(1), pp. 45–55. doi: https://doi.org/10.1080/03067319.2018.1427741.
  • Behbahani, M. et al. (2018) ‘The conjunction of a new ultrasonic-assisted dispersive solid-phase extraction method with HPLC-DAD for the trace determination of diazinon in biological and water media’, New Journal of Chemistry, 42(6), pp. 4289–4296. doi: https://doi.org/10.1039/c7nj03788k.
  • Bi, W., Tian, M. and Row, K. H. (2012) ‘Selective extraction and separation of oxymatrine from Sophora flavescens Ait. extract by silica-confined ionic liquid’, Journal of Chromatography B. Elsevier B.V., 880, pp. 108–113. doi: https://doi.org/10.1016/j.jchromb.2011.11.025.
  • Billiard, K. M., Dershem, A. R. and Gionfriddo, E. (2020) ‘Implementing Green Analytical Methodologies Using Solid-Phase Microextraction: A Review’, Molecules (Basel, Switzerland), 25, p. 5297. doi: https://doi.org/10.3390/molecules25225297.
  • Bish, D. L. (2013) ‘Parallels and distinctions between clay minerals and zeolites’, in Developments in Clay Science, pp. 783–800. doi: https://doi.org/10.1016/B978-0-08-098258-8.00026-2.
  • Boon, Y. H. et al. (2019) ‘Magnetic poly(β-cyclodextrin-ionic liquid) nanocomposites for micro-solid phase extraction of selected polycyclic aromatic hydrocarbons in rice samples prior to GC-FID analysis’, Food Chemistry. Elsevier, 278(November 2018), pp. 322–332. doi: https://doi.org/10.1016/j.foodchem.2018.10.145.
  • Boulanouar, S. et al. (2017) ‘Synthesis and application of molecularly imprinted polymers for the selective extraction of organophosphorus pesticides from vegetable oils’, Journal of Chromatography A. Elsevier B.V., 1513, pp. 59–68. doi: https://doi.org/10.1016/j.chroma.2017.07.067.
  • Bozorgzadeh, E., Pasdaran, A. and Ebrahimi-Najafabadi, H. (2021) ‘Determination of toxic heavy metals in fish samples using dispersive micro solid phase extraction combined with inductively coupled plasma optical emission spectroscopy’, Food Chemistry. Elsevier Ltd, 346(July 2020), p. 128916. doi: https://doi.org/10.1016/j.foodchem.2020.128916.
  • Bu, Y. et al. (2017) ‘An organically modified silica aerogel for online in-tube solid-phase microextraction’, Journal of Chromatography A, 1517, pp. 203–208. doi: https://doi.org/10.1016/j.chroma.2017.07.075.
  • Cagliero, C. et al. (2016) ‘Determination of acrylamide in brewed coffee and coffee powder using polymeric ionic liquid-based sorbent coatings in solid-phase microextraction coupled to gas chromatography-mass spectrometry’, Journal of Chromatography A. Elsevier B.V., 1449, pp. 2–7. doi: https://doi.org/10.1016/j.chroma.2016.04.034.
  • Cao, J. et al. (2017) ‘Ultrasound-assisted ionic liquid-based micellar extraction combined with microcrystalline cellulose as sorbent in dispersive microextraction for the determination of phenolic compounds in propolis’, Analytica Chimica Acta. Elsevier Ltd, 963, pp. 24–32. doi: https://doi.org/10.1016/j.aca.2017.01.063.
  • Cao, S. et al. (2019) ‘A high efficient adsorbent for plant growth regulators based on ionic liquid and β-cyclodextrin functionalized magnetic graphene oxide’, Talanta. Elsevier B.V., 194(August 2018), pp. 14–25. doi: https://doi.org/10.1016/j.talanta.2018.10.013.
  • Capoferri, D. et al. (2017) ‘MIP-MEPS based sensing strategy for the selective assay of dimethoate. Application to wheat fl our samples’, Talanta. Elsevier B.V., 174(June), pp. 599–604. doi: https://doi.org/10.1016/j.talanta.2017.06.062.
  • Casado, N. et al. (2017) ‘Current development and applications of ordered mesoporous silicas and other sol–gel silica-based materials in food sample preparation for xenobiotics analysis’, TrAC – Trends in Analytical Chemistry, 88, pp. 167–184. doi: https://doi.org/10.1016/j.trac.2017.01.001.
  • Casado, N. et al. (2020) ‘Two novel strategies in food sample preparation for the analysis of dietary polyphenols: Micro-extraction techniques and new silica-based sorbent materials’, Trends in Food Science and Technology, 98, pp. 167–180. doi: https://doi.org/10.1016/j.tifs.2018.06.020.
  • Chai, M. et al. (2018) ‘Application of polyethyleneimine-modified attapulgite for the solid-phase extraction of chlorophenols at trace levels in environmental water samples’, Analytical and Bioanalytical Chemistry, 410, pp. 6643–6651. doi: https://doi.org/10.1007/s00216-018-1271-8.
  • Chen, C. et al. (2014) ‘Development of a polymeric ionic liquid coating for direct-immersion solid-phase microextraction using polyhedral oligomeric silsesquioxane as cross-linker’, Journal of Chromatography A. Elsevier B.V., 1348, pp. 80–86. doi: https://doi.org/10.1016/j.chroma.2014.04.098.
  • Chen, L. et al. (2016a) ‘Molecular imprinting: perspectives and applications’, Chemical Society Reviews. Royal Society of Chemistry, 45, pp. 2137–2211. doi: https://doi.org/10.1039/c6cs00061d.
  • Chen, Lei et al. (2016b) ‘Sensitive determination of estrogens in environmental waters treated with polymeric ionic liquid-based stir cake sorptive extraction and liquid chromatographic analysis’, Talanta. Elsevier, 152, pp. 98–104. doi: https://doi.org/10.1016/j.talanta.2016.01.044.
  • Chen, M. et al. (2018) ‘Toxicity of carbon nanomaterials to plants, animals and microbes: Recent progress from 2015-present’, Chemosphere. Elsevier Ltd, 206, pp. 255–264. doi: https://doi.org/10.1016/j.chemosphere.2018.05.020.
  • Chen, M. L. et al. (2010) ‘The immobilization of hydrophilic ionic liquid for Cr(vi) retention and chromium speciation’, Journal of Analytical Atomic Spectrometry, 25(11), pp. 1688–1694. doi: https://doi.org/10.1039/c0ja00026d.
  • Chen, X., Hai, X. and Wang, J. (2016c) ‘Graphene/graphene oxide and their derivatives in the separation/isolation and preconcentration of protein species: A review’, Analytica Chimica Acta. Elsevier Ltd, 922, pp. 1–10. doi: https://doi.org/10.1016/j.aca.2016.03.050.
  • Cheng, H. L. et al. (2018) ‘Simultaneous determination of fifteen toxic alkaloids in meat dishes and vegetable dishes using double layer pipette tip magnetic dispersive solid phase extraction followed by UFLC-MS/MS’, Analytical Methods, 10(10), pp. 1151–1162. doi: https://doi.org/10.1039/c7ay02608k.
  • Chisvert, A., Cárdenas, S. and Lucena, R. (2019) ‘Dispersive micro-solid phase extraction’, TrAC – Trends in Analytical Chemistry, 112, pp. 226–233. doi: https://doi.org/10.1016/j.trac.2018.12.005.
  • Costa, M. J. F. et al. (2016) ‘Microwave-assisted single-surfactant templating synthesis of mesoporous zeolites’, RSC Advances, 6(60), pp. 54956–54963. doi: https://doi.org/10.1039/c6ra06554f.
  • Crini, G. (2005) ‘Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment’, Progress in Polymer Science (Oxford), 30(1), pp. 38–70. doi: https://doi.org/10.1016/j.progpolymsci.2004.11.002.
  • Dehghani, M. and Tadjarodi, A. (2020) ‘Formation and characterization of zeolite Y-platinum nanoparticles by rapid method of ultrasonic irradiation and investigation of its electrochemical property’, Journal of Nanostructures, 10(3), pp. 486–496. doi: https://doi.org/10.22052/JNS.2020.03.005.
  • Deng, D. et al. (2012) ‘Monolithic molecular imprinted polymer fiber for recognition and solid phase microextraction of ephedrine and pseudoephedrine in biological samples prior to capillary electrophoresis analysis’, Journal of Chromatography A, 1219, pp. 195–200. doi: https://doi.org/10.1016/j.chroma.2011.11.016.
  • Dowling, G. and Regan, L. (2011) ‘Journal of Pharmaceutical and Biomedical Analysis A new mixed mode solid phase extraction strategy for opioids, cocaines, amphetamines and adulterants in human blood with hybrid liquid chromatography tandem mass spectrometry detection’, Journal of Pharmaceutical and Biomedical Analysis. Elsevier B.V., 54(5), pp. 1136–1145. doi: https://doi.org/10.1016/j.jpba.2010.11.043.
  • Dramou, P. et al. (2019) ‘Preparation of novel molecularly imprinted magnetic graphene oxide and their application for quercetin determination’, Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences. Elsevier, 1124(June), pp. 273–283. doi: https://doi.org/10.1016/j.jchromb.2019.06.007.
  • Du, K. et al. (2018) ‘A green ionic liquid-based vortex-forced MSPD method for the simultaneous determination of 5-HMF and iridoid glycosides from Fructus Corni by ultra-high performance liquid chromatography’, Food Chemistry. Elsevier, 244(March 2017), pp. 190–196. doi: https://doi.org/10.1016/j.foodchem.2017.10.057.
  • Du, W. et al. (2014) ‘Determination of clenbuterol from pork samples using surface molecularly imprinted polymers as the selective sorbents for microextraction in packed syringe’, Journal of Pharmaceutical and Biomedical Analysis. Elsevier B.V., 91, pp. 160–168. doi: https://doi.org/10.1016/j.jpba.2013.12.022.
  • Elsayed, N. H., Alatawi, A. and Monier, M. (2020) ‘Diacetylmonoxine modified chitosan derived ion-imprinted polymer for selective solid-phase extraction of nickel (II) ions’, Reactive and Functional Polymers. Elsevier, 151(February), p. 104570. doi: https://doi.org/10.1016/j.reactfunctpolym.2020.104570.
  • Elwakeel, K. Z., Al-Bogami, A. S. and Elgarahy, A. M. (2018) ‘Efficient Retention of Chromate from Industrial Wastewater onto a Green Magnetic Polymer Based on Shrimp Peels’, Journal of Polymers and the Environment. Springer US, 26(5), pp. 2018–2029. doi: https://doi.org/10.1007/s10924-017-1096-0.
  • Esmailzadeh, A., Afzali, D. and Fayazi, M. (2020) ‘Determination of lead(II) in environmental water samples by solid-phase extraction using a novel modified carbon hybridised sepiolite combined with flame atomic absorption spectrometry’, International Journal of Environmental Analytical Chemistry. doi: https://doi.org/10.1080/03067319.2020.1791327.
  • Fahimirad, B. et al. (2018) ‘Diphenyl diselenide grafted onto a Fe3O4-chitosan composite as a new nanosorbent for separation of metal ions by effervescent salt-assisted dispersive magnetic micro solid-phase extraction’, Microchimica Acta. 185(12), p. 560. doi: https://doi.org/10.1007/s00604-018-3094-x.
  • Faraji, M., Yamini, Y. and Gholami, M. (2019) ‘Recent Advances and Trends in Applications of Solid-Phase Extraction Techniques in Food and Environmental Analysis’, Chromatographia, 82, pp. 1207–1249. doi: https://doi.org/10.1007/s10337-019-03726-9.
  • Feliczak-Guzik, A. (2018) ‘Hierarchical zeolites: Synthesis and catalytic properties’, Microporous and Mesoporous Materials. Elsevier Ltd, 259, pp. 33–45. doi: https://doi.org/10.1016/j.micromeso.2017.09.030.
  • Feng, J. et al. (2015) ‘Development of a functionalized polymeric ionic liquid monolith for solid-phase microextraction of polar endocrine disrupting chemicals in aqueous samples coupled to high-performance liquid chromatography’, Analytical and Bioanalytical Chemistry, 407(23), pp. 7025–7035. doi: https://doi.org/10.1007/s00216-015-8888-7.
  • Feng, J. et al. (2018) ‘Synthesis of magnetic graphene/mesoporous silica composites with boronic acid-functionalized pore-walls for selective and efficient residue analysis of aminoglycosides in milk’, Food Chemistry. Elsevier Ltd, 239, pp. 612–621. doi: https://doi.org/10.1016/j.foodchem.2017.06.052.
  • Feng, J. et al. (2019) ‘An ionic-liquid-modified melamine-formaldehyde aerogel for in-tube solid-phase microextraction of estrogens followed by high performance liquid chromatography with diode array detection’, Microchimica Acta. 186(12), p. 769. doi: https://doi.org/10.1007/s00604-019-3909-4.
  • Fernández, E. et al. (2020) ‘Magnetic dispersive solid-phase extraction using a zeolite-based composite for direct electrochemical determination of lead(II) in urine using screen-printed electrodes’, Microchimica Acta. 187(1), pp. 1–10. doi: https://doi.org/10.1007/s00604-019-4062-9.
  • Fernández, E., Vidal, L. and Canals, A. (2016) ‘Zeolite/iron oxide composite as sorbent for magnetic solid-phase extraction of benzene, toluene, ethylbenzene and xylenes from water samples prior to gas chromatography-mass spectrometry’, Journal of Chromatography A. Elsevier B.V., 1458, pp. 18–24. doi: https://doi.org/10.1016/j.chroma.2016.06.049.
  • Fiscal-Ladino, J. A. et al. (2017) ‘Ionic liquids intercalated in montmorillonite as the sorptive phase for the extraction of low-polarity organic compounds from water by rotating-disk sorptive extraction’, Analytica Chimica Acta, 953, pp. 23–31. doi: https://doi.org/10.1016/j.aca.2016.11.067.
  • Fizir, M. et al. (2018) ‘QbD approach by computer aided design and response surface methodology for molecularly imprinted polymer based on magnetic halloysite nanotubes for extraction of nor fl oxacin from real samples’, Talanta. Elsevier B.V., 184, pp. 266–276. doi: https://doi.org/10.1016/j.talanta.2018.02.056.
  • Fontanals, N., Borrull, F. and Marcé, R. M. (2012) ‘Ionic liquids in solid-phase extraction’, TrAC – Trends in Analytical Chemistry, 41, pp. 15–26. doi: https://doi.org/10.1016/j.trac.2012.08.010.
  • Fresco-Cala, B., Cárdenas, S. and Herrero-Martínez, J. M. (2017) ‘Preparation of porous methacrylate monoliths with oxidized single-walled carbon nanohorns for the extraction of nonsteroidal anti-inflammatory drugs from urine samples’, Microchimica Acta. 184(6), pp. 1863–1871. doi: https://doi.org/10.1007/s00604-017-2203-6.
  • Fukaya, Y. et al. (2007) ‘Bio ionic liquids: room temperature ionic liquids composed wholly of biomaterials’, Green Chemistry, 9, pp. 1155–1157. doi: https://doi.org/10.1039/b706571j.
  • Fumes, B. H. et al. (2015) ‘Recent advances and future trends in new materials for sample preparation’, TrAC – Trends in Analytical Chemistry. Elsevier B.V., 71, pp. 9–25. doi: https://doi.org/10.1016/j.trac.2015.04.011.
  • Gałuszka, A., Migaszewski, Z. and Namieśnik, J. (2013) ‘The 12 principles of green analytical chemistry and the SIGNIFICANCE mnemonic of green analytical practices’, TrAC – Trends in Analytical Chemistry, 50, pp. 78–84. doi: https://doi.org/10.1016/j.trac.2013.04.010.
  • García-Guzmán, J. J. et al. (2020) ‘Green Synthesis of NanoMaterials for BioSensing’, Nanotechnology in the Life Sciences. Springer, Cham, pp. 135–217. doi: https://doi.org/10.1007/978-3-030-45116-5_7.
  • Ghadiri, M., Chrzanowski, W. and Rohanizadeh, R. (2015) ‘Biomedical applications of cationic clay minerals’, RSC Advances, 5, pp. 29467–29481. doi: https://doi.org/10.1039/c4ra16945j.
  • Ghaemi, F. and Amiri, A. (2020) ‘Microcrystalline cellulose/metal−organic framework hybrid as a sorbent for dispersive micro-solid phase extraction of chlorophenols in water samples’, Journal of Chromatography A. Elsevier B.V., 1626, p. 461386. doi: https://doi.org/10.1016/j.chroma.2020.461386.
  • Ghani, M. (2020) ‘Nanocrystalline cellulose as a biotemplate for preparation of porous titania thin film as a sorbent for thin-film microextraction of ketorolac, meloxicam, diclofenac and mefenamic acid’, Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences. Elsevier, 1142(February), p. 122039. doi: https://doi.org/10.1016/j.jchromb.2020.122039.
  • Ghani, M., Ghoreishi, S. M. and Azamati, M. (2018) ‘In-situ growth of zeolitic imidazole framework-67 on nanoporous anodized aluminum bar as stir-bar sorptive extraction sorbent for determining caffeine’, Journal of Chromatography A. Elsevier B.V., 1577, pp. 15–23. doi: https://doi.org/10.1016/j.chroma.2018.09.049.
  • Gholami, H. et al. (2019) ‘Column packing elimination in matrix solid phase dispersion by using water compatible magnetic molecularly imprinted polymer for recognition of melamine from milk samples’, Journal of Chromatography A. Elsevier B.V., 1594, pp. 13–22. doi: https://doi.org/10.1016/j.chroma.2019.02.015.
  • Godage, N. H. and Gionfriddo, E. (2020) ‘Use of natural sorbents as alternative and green extractive materials: A critical review’, Analytica Chimica Acta. Elsevier Ltd, 1125, pp. 187–200. doi: https://doi.org/10.1016/j.aca.2020.05.045.
  • Guo, H. et al. (2017) ‘Rhein functionalized magnetic chitosan as a selective solid phase extraction for determination isoflavones in soymilk’, Carbohydrate Polymers. Elsevier Ltd., 165, pp. 96–102. doi: https://doi.org/10.1016/j.carbpol.2017.02.035.
  • Guo, L. et al. (2011) ‘Preparation and evaluation of molecularly imprinted ionic liquids polymer as sorbent for on-line solid-phase extraction of chlorsulfuron in environmental water samples’, Journal of Chromatography A. Elsevier B.V., 1218(37), pp. 6271–6277. doi: https://doi.org/10.1016/j.chroma.2011.07.016.
  • Hakim, Y. Z. et al. (2018) ‘Green Synthesis of Carbon Nanotubes from Coconut Shell Waste for the Adsorption of Pb(II) Ions’, Acta Chimica Asiana, 1(1), p. 6. doi: 10.29303/aca.v1i1.2.
  • Hamid Shirkhanloo, Kheirolnesa Merchant and Mostafa Dehghani Mobarake (2019) ‘Ultrasound-assisted Solid-liquid Trap Phase Extraction based on Functionalized Multi Wall Carbon Nanotubes for Preconcentration and Separation of Nickel in Petrochemical Waste Water’, Journal of Analytical Chemistry, 74(9), pp. 865–876. doi: https://doi.org/10.1134/S1061934819090090.
  • Han, H. et al. (2019) ‘A critical review of clay-based composites with enhanced adsorption performance for metal and organic pollutants’, Journal of Hazardous Materials, 369, pp. 780–796. doi: https://doi.org/10.1016/j.jhazmat.2019.02.003.
  • Hao, Y. et al. (2015) ‘Selective extraction of gallic acid in pomegranate rind using surface imprinting polymers over magnetic carbon nanotubes’, Analytical and Bioanalytical Chemistry, 407, pp. 7681–7690. doi: https://doi.org/10.1007/s00216-015-8930-9.
  • Hao, Y. et al. (2016) ‘Selective extraction and determination of chlorogenic acid in fruit juices using hydrophilic magnetic imprinted nanoparticles’, Food Chemisrty. Elsevier Ltd, 200, pp. 215–222. doi: https://doi.org/10.1016/j.foodchem.2016.01.004.
  • Haounati, R. et al. (2021) ‘Elaboration and properties of a new SDS/CTAB@Montmorillonite organoclay composite as a superb adsorbent for the removal of malachite green from aqueous solutions’, Separation and Purification Technology, 255, p. 117335. doi: https://doi.org/10.1016/j.seppur.2020.117335.
  • Haseen, U. and Ahmad, H. (2020) ‘Preconcentration and Determination of Trace Hg(II) Using a Cellulose Nanofiber Mat Functionalized with MoS2 Nanosheets’, Industrial and Engineering Chemistry Research, 59(7), pp. 3198–3204. doi: https://doi.org/10.1021/acs.iecr.9b06067.
  • Hashem, M. A. et al. (2020) ‘Synthesis and application of hydrazono-imidazoline modified cellulose for selective separation of precious metals from geological samples’, Carbohydrate Polymers. Elsevier, 237(March), p. 116177. doi: https://doi.org/10.1016/j.carbpol.2020.116177.
  • Hashemi, B. and Seyedzadeh, Z. (2016) ‘Synthesis of ion imprinted polymeric nanoparticles for selective pre concetration and recognition of lithium ions’, New Journal of Chemistry. Royal Society of Chemistry, 40, pp. 4803–4809. doi: https://doi.org/10.1039/C5NJ03366G.
  • Hashemi, B., Zohrabi, P. and Dehdashtian, S. (2018) ‘Application of green solvents as sorbent modifiers in sorptive-based extraction techniques for extraction of environmental pollutants’, TrAC - Trends in Analytical Chemistry, 109, pp. 50–61. doi: https://doi.org/10.1016/j.trac.2018.09.026.
  • Hassan, E. et al. (2018) ‘Sonochemical synthesis and characterization of emulsion polymer for sorption of lanthanides’, Journal of Molecular Liquids. Elsevier B.V., 255, pp. 556–561. doi: https://doi.org/10.1016/j.molliq.2018.01.151.
  • Ho, T. D., Canestraro, A. J. and Anderson, J. L. (2011) ‘Ionic liquids in solid-phase microextraction: A review’, Analytica Chimica Acta. Elsevier B.V., 695(1–2), pp. 18–43. doi: https://doi.org/10.1016/j.aca.2011.03.034.
  • Hosseini, H. A. et al. (2020) ‘Dispersive solid-phase microextraction with arginine-functionalized magnetic nanocomposite as the sorbent for separation and preconcentration of aspartame and optimization using response surface methodology’, Journal of the Iranian Chemical Society. Springer Berlin Heidelberg, 17(9), pp. 2397–2405. doi: https://doi.org/10.1007/s13738-020-01935-w.
  • Hosseinzadegan, S. et al. (2019) ‘FI-ICP-OES determination of Pb in drinking water after pre-concentration using magnetic nanoparticles coated with ionic liquid’, Microchemical Journal. Elsevier, 146(September 2018), pp. 339–344. doi: https://doi.org/10.1016/j.microc.2019.01.029.
  • Hou, X. et al. (2018) ‘Graphene oxide reinforced ionic liquid-functionalized adsorbent for solid-phase extraction of phenolic acids’, Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences. Elsevier, 1072(August 2017), pp. 123–129. doi: https://doi.org/10.1016/j.jchromb.2017.11.013.
  • Hu, X. et al. (2009) ‘Preparation and evaluation of propranolol molecularly imprinted solid-phase microextraction fiber for trace analysis of b-blockers in urine and plasma samples’, Journal of Chromatography A, 1216, pp. 190–197. doi: https://doi.org/10.1016/j.chroma.2008.11.064.
  • Hu, X. et al. (2012) ‘Analytica Chimica Acta Molecularly imprinted polymer coated solid-phase microextraction fiber prepared by surface reversible addition – fragmentation chain transfer polymerization for monitoring of Sudan dyes in chilli tomato sauce and chilli pepper sampl’, Analytica Chimica Acta. Elsevier B.V., 731, pp. 40–48. doi: https://doi.org/10.1016/j.aca.2012.04.013.
  • Hua, M. Z. et al. (2018) ‘Rapid detection and quanti fi cation of 2, 4-dichlorophenoxyacetic acid in milk using molecularly imprinted polymers – surface-enhanced Raman spectroscopy’, Food Chemistry. Elsevier, 258, pp. 254–259. doi: https://doi.org/10.1016/j.foodchem.2018.03.075.
  • Huang, C. et al. (2019a) ‘Effective Extraction of Domoic Acid from Seafood Based on Postsynthetic-Modified Magnetic Zeolite Imidazolate Framework-8 Particles’, Analytical Chemistry, 91(3), pp. 2418–2424. doi: https://doi.org/10.1021/acs.analchem.8b05202.
  • Huang, X. et al. (2011) ‘Novel extraction approach for liquid samples: Stir cake sorptive extraction using monolith’, J. Sep. Sci., 34, pp. 2145–2151. doi: https://doi.org/10.1002/jssc.201100283.
  • Huang, X. et al. (2019b) ‘Magnetic Solid-Phase Extraction of Dichlorodiphenyltrichloroethane and Its Metabolites from Environmental Water Samples Using Ionic Liquid Modified Magnetic Multiwalled Carbon Nanotube/Zeolitic Imidazolate Framework-8 as Sorbent’, Molecules, 24(15), p. 2758. doi: https://doi.org/10.3390/molecules24152758.
  • Huang, Z. and Lee, H. K. (2012) ‘Materials-based approaches to minimizing solvent usage in analytical sample preparation’, TrAC – Trends in Analytical Chemistry, 39, pp. 228–244. doi: https://doi.org/10.1016/j.trac.2012.05.007.
  • Hummers, W. S. and Offeman, R. E. (1958) ‘Preparation of Graphitic Oxide’, Journal of the American Chemical Society, 80(6), p. 1339. doi: https://doi.org/10.1021/ja01539a017.
  • Islam, A. K. M. M. et al. (2019) ‘Application of high-surface-area graphitized carbon black with primary secondary amine as an alternative quick, easy, cheap, effective, rugged, and safe cleanup material for pesticide multi-residue analysis in spinach’, Journal of Separation Science, 42(14), pp. 2379–2389. doi: https://doi.org/10.1002/jssc.201900066.
  • Jalali, M., Rajabi, F. and Ranjbar, F. (2016) ‘The removal of boron from aqueous solutions using natural and chemically modified sorbents’, Desalination and Water Treatment, 57(18), pp. 8278–8288. doi: https://doi.org/10.1080/19443994.2015.1020509.
  • Ji, W. et al. (2017) ‘Selective solid phase extraction of chloroacetamide herbicides from environmental water samples by amphiphilic magnetic molecularly imprinted polymers’, Talanta. Elsevier B.V., 170(March), pp. 111–118. doi: https://doi.org/10.1016/j.talanta.2017.04.005.
  • Jia, C. et al. (2020) ‘Attapulgite modified with covalent organic frameworks as the sorbent in dispersive solid phase extraction for the determination of pyrethroids in environmental water samples’, Microchemical Journal, 153, p. 104522. doi: https://doi.org/10.1016/j.microc.2019.104522.
  • Jiang, J. et al. (2019) ‘A composite consisting of sulfo-functionalized magnetic graphene and mesoporous silica for extraction of metformin and glimepiride prior to their determination by liquid chromatography tandem mass spectrometry’, Microchimica Acta. 186(8), pp. 1–9. doi: https://doi.org/10.1007/s00604-019-3693-1.
  • Jin, X. et al. (2018) ‘Green reduction of graphene oxide using eucalyptus leaf extract and its application to remove dye’, Chemosphere, 208, pp. 417–424. doi: https://doi.org/10.1016/j.chemosphere.2018.05.199.
  • Karaoglu, O. et al. (2020) ‘Efficient solid phase extraction of α-tocopherol and β-sitosterol from sunflower oil waste by improving the mesoporosity of the zeolitic adsorbent’, Food Chemistry. Elsevier, 311(October 2019), p. 125890. doi: https://doi.org/10.1016/j.foodchem.2019.125890.
  • Karimi, M., Shabani, A. M. H. and Dadfarnia, S. (2016) ‘Deep eutectic solvent-mediated extraction for ligand-less preconcentration of lead and cadmium from environmental samples using magnetic nanoparticles’, Microchimica Acta, 183(2), pp. 563–571. doi: https://doi.org/10.1007/s00604-015-1671-9.
  • Kataoka, H., Ishizaki, A. and Saito, K. (2016) ‘Recent progress in solid-phase microextraction and its pharmaceutical and biomedical applications’, Analytical Methods, 8, pp. 5773–5788. doi: https://doi.org/10.1039/c6ay00380j.
  • Kaur, Ramandeep et al. (2019) ‘Rapid monitoring of organochlorine pesticide residues in various fruit juices and water samples using fabric phase sorptive extraction and gas chromatography-mass spectrometry’, Molecules, 24(6), pp. 1–16. doi: https://doi.org/10.3390/molecules24061013.
  • Keskin, S. and Kayrak-talay, D. (2007) ‘A review of ionic liquids towards supercritical fluid applications’, J. of Supercritical fluids, 43, pp. 150–180. doi: https://doi.org/10.1016/j.supflu.2007.05.013.
  • Khalilian, F., Rezaee, M. and Gorgabi, M. K. (2015) ‘Analytical Methods e ff ective sorbent for the extraction of abamectin from fruit juices using magnetic solid-phase’, Analytical Methods. Royal Society of Chemistry, 7, pp. 2182–2189. doi: https://doi.org/10.1039/c4ay03074e.
  • Kheirandish, S. et al. (2017) ‘Design of a new technique based on combination of ultrasound waves via magnetite solid phase and cloud point microextraction for determination of Cr(III) ions’, Ultrasonics Sonochemistry. Elsevier, 39(May), pp. 798–809. doi: https://doi.org/10.1016/j.ultsonch.2017.06.006.
  • Khoobi, A. et al. (2019) ‘Multivariate optimization methods for in-situ growth of LDH/ZIF-8 nanocrystals on anodized aluminium substrate as a nanosorbent for stir bar sorptive extraction in biological and food samples’, Food Chemistry. Elsevier, 288(March), pp. 39–46. doi: https://doi.org/10.1016/j.foodchem.2019.02.118.
  • Kim, S. J. et al. (2015) ‘Green liquor extraction of hemicellulosic fractions and subsequent organic acid recovery from the extracts using liquid-liquid extraction’, Industrial Crops and Products, 67, pp. 395–402. doi: https://doi.org/10.1016/j.indcrop.2015.01.040.
  • Kinross, A. D. et al. (2020) ‘Comparison of Accelerated Solvent Extraction (ASE) and Energized Dispersive Guided Extraction (EDGE) for the analysis of pesticides in leaves’, Journal of Chromatography A. Elsevier B.V., 1627, p. 461414. doi: https://doi.org/10.1016/j.chroma.2020.461414.
  • Klongklaew, P. et al. (2018) ‘A hierarchically porous composite monolith polypyrrole/octadecyl silica/graphene oxide/chitosan cryogel sorbent for the extraction and pre-concentration of carbamate pesticides in fruit juices’, Analytical and Bioanalytical Chemistry. 410(27), pp. 7185–7193. doi: https://doi.org/10.1007/s00216-018-1323-0.
  • Kobrak, M. N. (2008) ‘The relationship between solvent polarity and molar volume in room-temperature ionic liquids’, Green Chemistry, 10, pp. 80–86. doi: https://doi.org/10.1039/b711991g.
  • Kotova, K. et al. (2013) ‘MIP sensors on the way to biotech applications: Targeting selectivity Dedicated to Prof. Franz L. Dickert on the occasion of his 70th birthday.’, Sensors and Actuators, B: Chemical. Elsevier B.V., 189, pp. 199–202. doi: https://doi.org/10.1016/j.snb.2013.03.040.
  • Kumari, C. et al. (2016) ‘Liquid–Liquid Extraction and Solid Phase Extraction for Urinary Organic Acids: A Comparative Study from a Resource Constraint Setting’, Indian Journal of Clinical Biochemistry, 31, pp. 414–422. doi: https://doi.org/10.1007/s12291-016-0557-x.
  • Kyzas, G. Z. and Kostoglou, M. (2014) ‘Green adsorbents for wastewaters: A critical review’, Materials, 7, pp. 333–364. doi: https://doi.org/10.3390/ma7010333.
  • Lahcen, A. A. et al. (2019) ‘Fast route for the synthesis of decorated nanostructured magnetic molecularly imprinted polymers using an ultrasound probe’, Ultrasonics Sonochemistry, 53, pp. 226–236. doi: https://doi.org/10.1016/j.ultsonch.2019.01.008.
  • Lamaoui, A. et al. (2019) ‘Study of solvent effect on the synthesis of magnetic molecularly imprinted polymers based on ultrasound probe: Application for sulfonamide detection’, Ultrasonics Sonochemistry. Elsevier, 58, p. 104670. doi: https://doi.org/10.1016/J.ULTSONCH.2019.104670.
  • Lamaoui, A. et al. (2021) ‘Molecularly imprinted polymers based on polydopamine: Assessment of non-specific adsorption’, Microchemical Journal. Elsevier, 164, p. 106043. doi: https://doi.org/10.1016/J.MICROC.2021.106043.
  • Larriba, M. et al. (2016) ‘Dicyanamide-based ionic liquids in the liquid-liquid extraction of aromatics from alkanes: Experimental evaluation and computational predictions’, Chemical Engineering Research and Design, 109, pp. 561–572. doi: https://doi.org/10.1016/j.cherd.2016.02.036.
  • Lazaratou, C. V., Vayenas, D. V. and Papoulis, D. (2020) ‘The role of clays, clay minerals and clay-based materials for nitrate removal from water systems: A review’, Applied Clay Science, 185, p. 105377. doi: https://doi.org/10.1016/j.clay.2019.105377.
  • Lee, S. M. et al. (2016) ‘Electrochemical sensor for trace determination of cadmium(II) from aqueous solutions: use of hybrid materials precursors to natural clays’, International Journal of Environmental Analytical Chemistry, 96, pp. 490–504. doi: https://doi.org/10.1080/03067319.2016.1172220.
  • Lei, Y. et al. (2014) ‘Preparation of a stir bar coated with molecularly imprinted polymer and its application in analysis of dopamine in urine’, Journal of Pharmaceutical and Biomedical Analysis. Elsevier B.V., 94, pp. 118–124. doi: https://doi.org/10.1016/j.jpba.2014.01.041.
  • Lhotská, I. et al. (2018) ‘Molecularly imprinted vs. reversed-phase extraction for the determination of zearalenone: a method development and critical comparison of sample clean-up efficiency achieved in an on-line coupled SPE chromatography system’, Analytical and Bioanalytical Chemistry, 410, pp. 3265–3273. doi: https://doi.org/10.1007/s00216-018-0920-2.
  • Li, Q. et al. (2018) ‘A paradigm shift design of functional monomers for developing molecularly imprinted polymers’, Chemical Engineering Journal. Elsevier, 350(May), pp. 217–224. doi: https://doi.org/10.1016/j.cej.2018.05.187.
  • Li, W. et al. (2020) ‘Effective removal matrix interferences by a modi fi ed QuEChERS based on the molecularly imprinted polymers for determination of 84 polychlorinated biphenyls and organochlorine pesticides in shell fi sh samples’, Journal of Hazardous Materials. Elsevier, 384(September 2019), p. 121241. doi: https://doi.org/10.1016/j.jhazmat.2019.121241.
  • Li, X. X. et al. (2012) ‘Preparation and characterization of enrofloxacin-imprinted monolith prepared with crowding agents’, Journal of Chromatography A. Elsevier B.V., 1251, pp. 141–147. doi: https://doi.org/10.1016/j.chroma.2012.06.050.
  • Liang, C. et al. (2020a) ‘Ordered macroporous molecularly imprinted polymers prepared by a surface imprinting method and their applications to the direct extraction of fl avonoids from Gingko leaves’, Food Chemistry. Elsevier, 309, p. 125680. doi: https://doi.org/10.1016/j.foodchem.2019.125680.
  • Liang, J. et al. (2020b) ‘Environmental benign synthesis of Nano-SSZ-13 via FAU trans-crystallization: Enhanced NH3-SCR performance on Cu-SSZ-13 with nano-size effect’, Journal of Hazardous Materials. Elsevier, 398(March), p. 122986. doi: https://doi.org/10.1016/j.jhazmat.2020.122986.
  • Liang, S. et al. (2017) ‘Molecularly imprinted phloroglucinol e formaldehyde e melamine resin prepared in a deep eutectic solvent for selective recognition of clorprenaline and bambuterol in urine’, Analytica Chimica Acta. Elsevier Ltd, 951, pp. 68–77. doi: https://doi.org/10.1016/j.aca.2016.11.009.
  • Lioupi, A. et al. (2019) ‘Fabric phase sorptive extraction for the isolation of five common antidepressants from human urine prior to HPLC-DAD analysis’, Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences. Elsevier, 1118–1119(April), pp. 171–179. doi: https://doi.org/10.1016/j.jchromb.2019.04.045.
  • Liu, X. et al. (2013) ‘Preparation, characterization and application of organic-inorganic hybrid caffeine imprinted monolith’, Journal of Chromatography A. Elsevier B.V., 1304, pp. 10–17. doi: https://doi.org/10.1016/j.chroma.2013.06.060.
  • López-Darias, J. et al. (2010) ‘Determination of water pollutants by direct-immersion solid-phase microextraction using polymeric ionic liquid coatings’, Journal of Chromatography A, 1217(8), pp. 1236–1243. doi: https://doi.org/10.1016/j.chroma.2009.12.041.
  • Lu, Y. C. et al. (2019) ‘Preparation of core-shell magnetic molecularly imprinted polymer nanoparticle for the rapid and selective enrichment of trace diuron from complicated matrices’, Ecotoxicology and Environmental Safety, 177, pp. 66–76. doi: https://doi.org/10.1016/j.ecoenv.2019.03.117.
  • Ma, W. and Row, K. H. (2018) ‘Solid-phase extraction of chlorophenols in seawater using a magnetic ionic liquid molecularly imprinted polymer with incorporated silicon dioxide as a sorbent’, Journal of Chromatography A. Elsevier B.V., 1559, pp. 78–85. doi: https://doi.org/10.1016/j.chroma.2018.01.013.
  • Magiera, S. and Kwietniowska, E. (2016) ‘Fast, simple and efficient salting-out assisted liquid-liquid extraction of naringenin from fruit juice samples prior to their enantioselective determination by liquid chromatography’, Food Chemistry, 211, pp. 227–234. doi: https://doi.org/10.1016/j.foodchem.2016.05.045.
  • Mahmoud, M. E., Abdou, A. E. H. and Sobhy, M. E. (2017) ‘Engineered nano-zirconium oxide-crosslinked-nanolayer of carboxymethyl cellulose for speciation and adsorptive removal of Cr(III) and Cr(VI)’, Powder Technology. Elsevier B.V., 321, pp. 444–453. doi: https://doi.org/10.1016/j.powtec.2017.08.041.
  • Malucelli, G. (2016) ‘Hybrid organic/inorganic coatings through dual-cure processes: State of the art and perspectives’, Coatings, 6, p. 10. doi: https://doi.org/10.3390/coatings6010010.
  • Maragou, N. C. et al. (2020) ‘Determination of bisphenol A in canned food by microwave assisted extraction, molecularly imprinted polymer-solid phase extraction and liquid chromatography-mass spectrometry’, Journal of Chromatography B. Elsevier, 1137(October 2019), p. 121938. doi: https://doi.org/10.1016/j.jchromb.2019.121938.
  • Martín-Esteban, A. (2013) ‘Molecularly-imprinted polymers as a versatile, highly selective tool in sample preparation’, TrAC – Trends in Analytical Chemistry, 45(1), pp. 169–181. doi: https://doi.org/10.1016/j.trac.2012.09.023.
  • Mastellone, G. et al. (2021) ‘New phases for analytical scale extraction from plants: Current and future trends’, Trends in Analytical Chemistry. Elsevier Ltd, 141, p. 116288. doi: https://doi.org/10.1016/j.trac.2021.116288.
  • Mateos, R. et al. (2018) ‘Dispersive solid phase extraction/fluorescence analysis of riboflavin using sepiolite as sorbent’, Applied Clay Science, 163, pp. 279–290. doi: https://doi.org/10.1016/j.clay.2018.07.033.
  • Mateos, R. et al. (2019) ‘Graphene/sepiolite mixtures as dispersive solid-phase extraction sorbents for the anaysis of polycyclic aromatic hydrocarbons in wastewater using surfactant aqueous solutions for desorption’, Journal of Chromatography A, 1596, pp. 30–40. doi: https://doi.org/10.1016/j.chroma.2019.03.004.
  • Mayor, M. A. G. et al. (2017) ‘Synthesis and characterization of a molecularly imprinted polymer for the determination of spiramycin in sheep milk’, Food Chemistry, 221, pp. 721–728. doi: https://doi.org/10.1016/j.foodchem.2016.11.114.
  • Merkle, S., Kleeberg, K. and Fritsche, J. (2015) ‘Recent Developments and Applications of Solid Phase Microextraction (SPME) in Food and Environmental Analysis—A Review’, Chromatography, 2, pp. 293–381. doi: https://doi.org/10.3390/chromatography2030293.
  • Mezzache, S., Boulanouar, S. and Comb, A. (2018) ‘Synthesis and application of molecularly imprinted silica for the selective extraction of some polar organophosphorus pesticides from’, Analytica Chimica Acta, 1018, pp. 35–44. doi: https://doi.org/10.1016/j.aca.2018.02.069.
  • Miranda, L. F. C., Domingues, D. S. and Queiroz, M. E. C. (2016) ‘Selective solid-phase extraction using molecularly imprinted polymers for analysis of venlafaxine, O -desmethylvenlafaxine, and N -desmethylvenlafaxine in plasma samples by liquid chromatography – tandem mass spectrometry’, Journal of Chromatography A. Elsevier B.V., 1458, pp. 46–53. doi: https://doi.org/10.1016/j.chroma.2016.06.024.
  • Miskam, M., Abu Bakar, N. K. and Mohamad, S. (2014) ‘Determination of polar aromatic amines using newly synthesized sol-gel titanium (IV) butoxide cyanopropyltriethoxysilane as solid phase extraction sorbent’, Talanta, 120, pp. 450–455. doi: https://doi.org/10.1016/j.talanta.2013.12.037.
  • Mohammadiazar, S., Maham, M. and Hasanli, F. (2019) ‘Corn-like stationary phase for solid phase microextraction prepared by electro-assisted deposition of sol-gel/silica nanoparticles composite’, Microchemical Journal, 147, pp. 914–920. doi: https://doi.org/10.1016/j.microc.2019.04.012.
  • Mohiuddin, I. et al. (2021) ‘Starch-Mg/Al layered double hydroxide composites as an efficient solid phase extraction sorbent for non-steroidal anti-inflammatory drugs as environmental pollutants’, Journal of Hazardous Materials. Elsevier B.V., 401(September 2020), p. 123782. doi: https://doi.org/10.1016/j.jhazmat.2020.123782.
  • Mompó-Roselló, O. et al. (2020) ‘Extraction of β-blockers from urine with a polymeric monolith modified with 1-allyl-3-methylimidazolium chloride in spin column format’, Talanta. Elsevier B.V., 214(January), p. 120860. doi: https://doi.org/10.1016/j.talanta.2020.120860.
  • Moreno-González, D. and García-Campaña, A. M. (2017) ‘Salting-out assisted liquid–liquid extraction coupled to ultra-high performance liquid chromatography–tandem mass spectrometry for the determination of tetracycline residues in infant foods’, Food Chemistry, 221, pp. 1763–1769. doi: https://doi.org/10.1016/j.foodchem.2016.10.107.
  • Mousavi, F. and Pawliszyn, J. (2013) ‘Silica-based ionic liquid coating for 96-blade system for extraction of aminoacids from complex matrixes’, Analytica Chimica Acta. Elsevier B.V., 803, pp. 66–74. doi: https://doi.org/10.1016/j.aca.2013.07.005.
  • Murtada, K. et al. (2021) ‘Development of porous carbon/polydimethylsiloxane thin-film solid-phase microextraction membranes to facilitate on-site sampling of volatile organic compounds’, Sustainable Chemistry and Pharmacy. Elsevier B.V., 21(March), p. 100435. doi: https://doi.org/10.1016/j.scp.2021.100435.
  • Nagendrappa, G. (2002) ‘Organic synthesis using clay catalysts’, Resonance, 7, pp. 64–77. doi: https://doi.org/10.1007/bf02836172.
  • Nasir, A. N. M. et al. (2019) ‘Thiol-functionalized magnetic carbon nanotubes for magnetic micro-solid phase extraction of sulfonamide antibiotics from milks and commercial chicken meat products’, Food Chemistry. Elsevier, 276(October 2018), pp. 458–466. doi: https://doi.org/10.1016/j.foodchem.2018.10.044.
  • Nasir, S. et al. (2018) ‘Carbon-based nanomaterials/allotropes: A glimpse of their synthesis, properties and some applications’, Materials, 11(2), pp. 1–24. doi: https://doi.org/10.3390/ma11020295.
  • Nasrollahzadeh, M. et al. (2021) ‘Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review’, Carbohydrate Polymers. Elsevier Ltd, 251(September 2020), p. 116986. doi: https://doi.org/10.1016/j.carbpol.2020.116986.
  • Ng, N. T. et al. (2017) ‘Agarose-chitosan-C18 film micro-solid phase extraction combined with high performance liquid chromatography for the determination of phenanthrene and pyrene in chrysanthemum tea samples’, Food Chemistry. Elsevier Ltd, 222, pp. 28–34. doi: https://doi.org/10.1016/j.foodchem.2016.11.147.
  • Nosike, E. I. et al. (2020) ‘A novel hybrid nanoadsorbent for effective Hg2+ adsorption based on zeolitic imidazolate framework (ZIF-90) assembled onto poly acrylic acid capped Fe3O4 nanoparticles and cysteine’, Journal of Hazardous Materials. Elsevier, 392(February), p. 122288. doi: https://doi.org/10.1016/j.jhazmat.2020.122288.
  • Nur, M. et al. (2019) ‘Molecularly imprinted silica gel incorporated with agarose polymer matrix as mixed matrix membrane for separation and preconcentration of sulfonamide antibiotics in water samples’, Talanta. Elsevier B.V., 199, pp. 522–531. doi: https://doi.org/10.1016/j.talanta.2019.02.096.
  • Nurerk, P., Kanatharana, P. and Bunkoed, O. (2017) ‘Polyaniline-coated magnetite nanoparticles incorporated in alginate beads for the extraction and enrichment of polycyclic aromatic hydrocarbons in water samples’, International Journal of Environmental Analytical Chemistry. Taylor & Francis, 97(2), pp. 145–158. doi: https://doi.org/10.1080/03067319.2017.1291808.
  • Ostovan, A. et al. (2017) ‘Hollow porous molecularly imprinted polymer for highly selective clean-up followed by influential preconcentration of ultra-trace glibenclamide from bio-fluid’, Journal of Chromatography A. Elsevier B.V., 1520, pp. 65–74. doi: https://doi.org/10.1016/j.chroma.2017.09.026.
  • Othman, N. Z. et al. (2020) ‘Alginate incorporated multi-walled carbon nanotubes as dispersive micro solid phase extraction sorbent for selective and efficient separation of acidic drugs in water samples’, Nature Environment and Pollution Technology, 19(3), pp. 1155–1162. doi: https://doi.org/10.46488/NEPT.2020.v19i03.028.
  • Owens, G. et al. (2016) ‘Sol–gel based materials for biomedical applications’, Progress in Materials Science, 77, pp. 1–79. doi: https://doi.org/10.1016/j.pmatsci.2015.12.001.
  • Pacheco-Fernández, I. et al. (2016) ‘Utilization of highly robust and selective crosslinked polymeric ionic liquid-based sorbent coatings in direct-immersion solid-phase microextraction and high-performance liquid chromatography for determining polar organic pollutants in waters’, Talanta, 158, pp. 125–133. doi: https://doi.org/10.1016/j.talanta.2016.05.041.
  • Panjan, P. et al. (2018) ‘Development of a folic acid molecularly imprinted polymer and its evaluation as a sorbent for dispersive solid-phase extraction by liquid chromatography coupled to mass spectrometry’, Journal of Chromatography A. Elsevier B.V., 1576, pp. 26–33. doi: https://doi.org/10.1016/j.chroma.2018.09.037.
  • Parashar, M., Shukla, V. K. and Singh, R. (2020) ‘Metal oxides nanoparticles via sol–gel method: a review on synthesis, characterization and applications’, Journal of Materials Science: Materials in Electronics, 31, pp. 3729–3749. doi: https://doi.org/10.1007/s10854-020-02994-8.
  • Paukpol, A., Hartwell, S. K. and Jakmunee, J. (2020) ‘Anodic Stripping Voltammetry with a Dynamic Flow-through Sequential Extraction Method for Fractionation Study of Cadmium and Lead in Soil’, Soil and Sediment Contamination, 29, pp. 650–664. doi: https://doi.org/10.1080/15320383.2020.1761288.
  • Pebdani, A. A. et al. (2016) ‘Application of modified stir bar with nickel:zinc sulphide nanoparticles loaded on activated carbon as a sorbent for preconcentration of losartan and valsartan and their determination by high performance liquid chromatography’, Journal of Chromatography A. Elsevier B.V., 1437, pp. 15–24. doi: https://doi.org/10.1016/j.chroma.2016.02.004.
  • Peng, C. et al. (2021) ‘In-tube solid phase microextraction and determination of ractopamine in pork muscle samples using amide group modified polysaccharide-silica hybrid monolith as sorbent prior to HPLC analysis’, Food Chemistry, 355, p. 129662. doi: https://doi.org/10.1016/j.foodchem.2021.129662.
  • Pérez-Mayán, L. et al. (2019) ‘Fabric phase sorptive extraction followed by ultra-performance liquid chromatography-tandem mass spectrometry for the determination of fungicides and insecticides in wine’, Journal of Chromatography A. Elsevier B.V., 1584, pp. 13–23. doi: https://doi.org/10.1016/j.chroma.2018.11.025.
  • Pinto, P. C. R., Da Silva, E. A. B. and Rodrigues, A. E. (2010) ‘Comparative study of solid-phase extraction and liquid-liquid extraction for the reliable quantification of high value added compounds from oxidation processes of wood-derived lignin’, Industrial and Engineering Chemistry Research. doi: https://doi.org/10.1021/ie101680s.
  • Poole, C. F. (2003) ‘New trends in solid-phase extraction’, TrAC – Trends in Analytical Chemistry, 22, pp. 362–373. doi: https://doi.org/10.1016/S0165-9936(03)00605-8.
  • Rahbar, N., Behrouz, E. and Ramezani, Z. (2017) ‘One-Step Synthesis of Zirconia and Magnetite Nanocomposite Immobilized Chitosan for Micro-Solid-Phase Extraction of Organophosphorous Pesticides from Juice and Water Samples Prior to Gas Chromatography/Mass Spectroscopy’, Food Analytical Methods. Food Analytical Methods, 10(7), pp. 2229–2240. doi: https://doi.org/10.1007/s12161-016-0769-y.
  • Rashidi Nodeh, H. et al. (2018) ‘Magnetic graphene sol–gel hybrid as clean-up adsorbent for acrylamide analysis in food samples prior to GC–MS’, Food Chemistry, 239, pp. 208–216. doi: https://doi.org/10.1016/j.foodchem.2017.06.094.
  • Razavi, N. and Sarafraz Yazdi, A. (2017) ‘New application of chitosan-grafted polyaniline in dispersive solid-phase extraction for the separation and determination of phthalate esters in milk using high-performance liquid chromatography’, Journal of Separation Science, 40(8), pp. 1739–1746. doi: https://doi.org/10.1002/jssc.201601059.
  • Razmi, H., Musevi, S. J. and Mohammad-Rezaei, R. (2016) ‘Solid phase extraction of mercury(II) using soluble eggshell membrane protein doped with reduced graphene oxide, and its quantitation by anodic stripping voltammetry’, Microchimica Acta, 183, pp. 555–562. doi: https://doi.org/10.1007/s00604-015-1665-7.
  • Reijnders, L. (2014) ‘Safe recycling of materials containing persistent inorganic and carbon nanoparticles’, Health and Environmental Safety of Nanomaterials: Polymer Nancomposites and Other Materials Containing Nanoparticles. Woodhead Publishing Limited. doi: https://doi.org/10.1533/9780857096678.3.222.
  • Renkecz, T., László, K. and Horváth, V. (2012) ‘In situ synthesis of molecularly imprinted nanoparticles in porous support membranes using high-viscosity polymerization solvents’, Journal of Molecular Recognition, 25(November 2011), pp. 320–329. doi: https://doi.org/10.1002/jmr.2153.
  • Rezaei, M., Rajabi, H. R. and Ra, Z. (2020) ‘Selective and rapid extraction of piroxicam from water and plasma samples using magnetic imprinted polymeric nanosorbent: Synthesis, characterization and application’, Colloids and Surface, 586, p. 124553. doi: https://doi.org/10.1016/j.colsurfa.2019.124253.
  • Rofouei, M. K. et al. (2017) ‘A bucky gel consisting of Fe3O4 nanoparticles, graphene oxide and ionic liquid as an efficient sorbent for extraction of heavy metal ions from water prior to their determination by ICP-OES’, Microchimica Acta. 184(9), pp. 3425–3432. doi: https://doi.org/10.1007/s00604-017-2370-5.
  • Rohanifar, A. et al. (2018) ‘Solid-phase microextraction of heavy metals in natural water with a polypyrrole/carbon nanotube/1, 10–phenanthroline composite sorbent material’, Talanta, 188(June), pp. 570–577. doi: https://doi.org/10.1016/j.talanta.2018.05.100.
  • Sadeghi, S. J., Seidi, S. and Ghasemi, J. B. (2017) ‘Graphene oxide-alizarin yellow R-magnetic chitosan nanocomposite: A selective and efficient sorbent for sub-trace determination of aluminum in water samples’, Analytical Methods, 9(2), pp. 222–231. doi: https://doi.org/10.1039/c6ay03057b.
  • Sadeghi, S. and Oliaei, S. (2021) ‘Microextraction of sulfathiazole from milk and honey samples using a polymeric ionic liquid membrane followed by fluorometric determination’, Journal of Food Composition and Analysis. Elsevier Inc., 97(August 2020), p. 103774. doi: https://doi.org/10.1016/j.jfca.2020.103774.
  • Sahebi, H. et al. (2019) ‘Chitosan grafted onto Fe3O4@poly(: N -vinylcaprolactam) as a new sorbent for detecting Imatinib mesylate in biosamples using UPLC-MS/MS’, Analyst. Royal Society of Chemistry, 144(24), pp. 7336–7350. doi: https://doi.org/10.1039/c9an01654f.
  • Sahebi, H. et al. (2020) ‘Simultaneous determination of five penicillins in milk using a new ionic liquid-modified magnetic nanoparticle based dispersive micro-solid phase extraction followed by ultra-performance liquid chromatography-tandem mass spectrometry’, Microchemical Journal. Elsevier, 154(January), p. 104605. doi: https://doi.org/10.1016/j.microc.2020.104605.
  • Sajid, M. et al. (2017) ‘Evaluation of layered double hydroxide/graphene hybrid as a sorbent in membrane-protected stir-bar supported micro-solid-phase extraction for determination of organochlorine pesticides in urine samples’, Journal of Chromatography A. Elsevier B.V., 1489, pp. 1–8. doi: https://doi.org/10.1016/j.chroma.2017.01.089.
  • Salisaeng, P. et al. (2016) ‘Vortex-Assisted Dispersive Micro-Solid Phase Extraction Using CTAB-Modified Zeolite NaY Sorbent Coupled with HPLC for the Determination of Carbamate Insecticides’, Journal of Agricultural and Food Chemistry, 64(10), pp. 2145–2152. doi: https://doi.org/10.1021/acs.jafc.5b05437.
  • Sampaio, N. M. F. M. et al. (2019) ‘Evaluation of polyvinyl alcohol/pectin-based hydrogel disks as extraction phase for determination of steroidal hormones in aqueous samples by GC-MS/MS’, Molecules, 24(1). doi: https://doi.org/10.3390/molecules24010040.
  • Sarp, G. and Yilmaz, E. (2019) ‘A flower-like hybrid material composed of Fe3O4, graphene oxide and CdSe nanodots for magnetic solid phase extraction of ibuprofen prior to its quantification by HPLC detection’, Microchimica Acta. 186(11), p. 744. doi: https://doi.org/10.1007/s00604-019-3875-x.
  • Seidi, S. et al. (2020) ‘Electrochemically deposition of ionic liquid modified graphene oxide for circulated headspace in-tube solid phase microextraction of naphthalene from honey samples followed by on-line liquid chromatography analysis’, Journal of Chromatography A. Elsevier B.V., 1628, p. 461486. doi: https://doi.org/10.1016/j.chroma.2020.461486.
  • Sereshti, H. et al. (2020) ‘Hyphenated dispersive solid- and liquid-phase microextraction technique based on a hydrophobic deep eutectic solvent: application for trace analysis of pesticides in fruit juices’, Journal of the Science of Food and Agriculture, 100(6), pp. 2534–2543. doi: https://doi.org/10.1002/jsfa.10279.
  • Sereshti, H., Khosraviani, M. and Sadegh Amini-Fazl, M. (2014) ‘Miniaturized salting-out liquid-liquid extraction in a coupled-syringe system combined with HPLC-UV for extraction and determination of sulfanilamide’, Talanta, 121, pp. 199–204. doi: https://doi.org/10.1016/j.talanta.2014.01.005.
  • Shah, F. et al. (2020) ‘Extraction of Lead through Functionalized Carbon Nanotubes and Estimation of the Measurement Uncertainty’, Analytical Letters. Taylor & Francis, 53(10), pp. 1566–1579. doi: https://doi.org/10.1080/00032719.2020.1711521.
  • Shearrow, A. M. et al. (2009) ‘Ionic liquid-mediated sol-gel coatings for capillary microextraction’, Journal of Chromatography A, 1216(29), pp. 5449–5458. doi: https://doi.org/10.1016/j.chroma.2009.04.093.
  • Shemirani, F. (2016) ‘A new magnetic ion-imprinted polymer as a highly selective sorbent for determination of cobalt in biological and environmental samples’, Talanta, 146, pp. 244–252. doi: https://doi.org/10.1016/j.talanta.2015.08.046.
  • Silva, A. D. S. Da, De Moraes, D. P. and Dos Santos, J. H. Z. (2019) ‘Sol-gel hybrid silicas as an useful tool to mercury removal’, Journal of Environmental Chemical Engineering, 7, p. 103428. doi: https://doi.org/10.1016/j.jece.2019.103428.
  • Singh, S., Srivastava, A. and Singh, S. P. (2018) ‘Inexpensive, effective novel activated carbon fibers for sample cleanup: application to multipesticide residue analysis in food commodities using a QuEChERS method’, Analytical and Bioanalytical Chemistry. 410(8), pp. 2241–2251. doi: https://doi.org/10.1007/s00216-018-0894-0.
  • Smith, Y. R. et al. (2016) ‘Adsorption of aqueous rare earth elements using carbon black derived from recycled tires’, Chemical Engineering Journal. Elsevier B.V., 296, pp. 102–111. doi: https://doi.org/10.1016/j.cej.2016.03.082.
  • Soriano, M. L. et al. (2018) ‘Cyclodextrin-modified nanodiamond for the sensitive fluorometric determination of doxorubicin in urine based on its differential affinity towards β/γ-cyclodextrins’, Microchimica Acta. 185(2), p. 115. doi: https://doi.org/10.1007/s00604-017-2660-y.
  • Sousa, D. V. M. et al. (2020) ‘Cellulose cone tip as a sorbent material for multiphase electrical field-assisted extraction of cocaine from saliva and determination by LC-MS/MS’, Talanta. Elsevier B.V., 208(September 2019), p. 120353. doi: https://doi.org/10.1016/j.talanta.2019.120353.
  • Souza, I. D., Hantao, L. W. and Queiroz, M. E. C. (2019) ‘Polymeric ionic liquid open tubular capillary column for on-line in-tube SPME coupled with UHPLC-MS/MS to determine endocannabinoids in plasma samples’, Analytica Chimica Acta, 1045, pp. 108–116. doi: https://doi.org/10.1016/j.aca.2018.08.062.
  • Sowa, I. et al. (2014) ‘Application of solid phase extraction with the use of silica modified with polyaniline film for pretreatment of samples from plant material before HPLC determination of triterpenic acids’, Talanta, 122, pp. 51–57. doi: https://doi.org/10.1016/j.talanta.2014.01.039.
  • Stashkiv, O. et al. (2019) ‘Solid phase extraction of trace amounts of praseodymium using transcarpathian clinoptilolite’, Colloids and Interfaces, 3(1), pp. 1–10. doi: https://doi.org/10.3390/colloids3010027.
  • Sun, M. et al. (2021) ‘Graphene oxide-functionalized mesoporous silica for online in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons from honey and detection by high performance liquid chromatography-diode array detector’, Microchemical Journal, 166, p. 106263. doi: https://doi.org/10.1016/j.microc.2021.106263.
  • Suo, L. et al. (2019) ‘Functionalization of a SiO2-coated magnetic graphene oxide composite with polyaniline-polypyrrole for magnetic solid phase extraction of ultra-trace Cr(iii) and Pb(ii) in water and food samples using a Box-Behnken design’, New Journal of Chemistry, 43, pp. 12126–12136. doi: https://doi.org/10.1039/c9nj02038a.
  • Tabish, M. S. et al. (2019) ‘Alginate-graphene oxide biocomposite sorbent for rapid and selective extraction of non-steroidal anti-inflammatory drugs using micro-solid phase extraction’, Indonesian Journal of Chemistry, 19(3), pp. 684–695. doi: https://doi.org/10.22146/ijc.38168.
  • Talita, A. et al. (2017) ‘Efficient molecularly imprinted polymer as a pipette-tip solid-phase sorbent for determination of carvedilol enantiomers in human urine’, Journal of Chromatography B. Elsevier, 1061–1062, pp. 399–410. doi: https://doi.org/10.1016/j.jchromb.2017.07.056.
  • Tan, S. C. and Lee, H. K. (2019) ‘A hydrogel composite prepared from alginate, an amino-functionalized metal-organic framework of type MIL-101(Cr), and magnetite nanoparticles for magnetic solid-phase extraction and UHPLC-MS/MS analysis of polar chlorophenoxy acid herbicides’, Microchimica Acta. 186(8). doi: https://doi.org/10.1007/s00604-019-3679-z.
  • Tang, K. et al. (2014) ‘Preparation of molecularly imprinted polymer for use as SPE adsorbent for the simultaneous determination of five sulphonylurea herbicides by HPLC’, Food Chemistry. Elsevier Ltd, 150, pp. 106–112. doi: https://doi.org/10.1016/j.foodchem.2013.10.152.
  • Tang, Y. et al. (2016) ‘Determination of clenbuterol in pork and potable water samples by molecularly imprinted polymer through the use of covalent imprinting method’, Food Chemistry. Elsevier Ltd, 190, pp. 952–959. doi: https://doi.org/10.1016/j.foodchem.2015.06.067.
  • Tang, Y. Q. and Weng, N. (2013) ‘Salting-out assisted liquid-liquid extraction for bioanalysis’, Bioanalysis, 5, p. 12. doi: https://doi.org/10.4155/bio.13.117.
  • Tanimu, A. et al. (2021) ‘Multivariate optimization of chlorinated hydrocarbons’ micro-solid-phase extraction from wastewater using germania-decorated mesoporous alumina-silica sorbent and analysis by GC–MS’, Microchemical Journal, 160, p. 105674. doi: https://doi.org/10.1016/j.microc.2020.105674.
  • Tartaglia, A. et al. (2020) ‘Fast off-line FPSE-HPLC-PDA determination of six NSAIDs in saliva samples’, Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences. Elsevier, 1144(March), p. 122082. doi: https://doi.org/10.1016/j.jchromb.2020.122082.
  • Tejada-Casado, C. et al. (2018) ‘Green and simple analytical method to determine benzimidazoles in milk samples by using salting-out assisted liquid-liquid extraction and capillary liquid chromatography’, Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, 1091, pp. 46–52. doi: https://doi.org/10.1016/j.jchromb.2018.05.024.
  • de Toffoli, A. L. et al. (2018) ‘The role of graphene-based sorbents in modern sample preparation techniques’, Journal of Separation Science, 41(1), pp. 288–302. doi: https://doi.org/10.1002/jssc.201700870.
  • Tootoonchi, A. and Davarani, S. S. S. H. (2016) ‘Extraction of Hg(II) Ions from Aqueous Solution by a Magnetic Nano Sorbent Followed by Determination through Stripping Differential Pulse Voltammetry on Commercial Screen-Printed Kits’, Journal of The Electrochemical Society, 163, p. B366. doi: https://doi.org/10.1149/2.1071607jes.
  • Trenholm, R. A., Vanderford, B. J. and Snyder, S. A. (2009) ‘On-line solid phase extraction LC-MS/MS analysis of pharmaceutical indicators in water: A green alternative to conventional methods’, Talanta, 79, pp. 1425–1432. doi: https://doi.org/10.1016/j.talanta.2009.06.006.
  • Tu, C. et al. (2019) ‘Determination of Chloramphenicol in Honey and Milk by HPLC Coupled with Aptamer-Functionalized Fe3O4/Graphene Oxide Magnetic Solid-Phase Extraction’, Journal of Food Science, 84(12), pp. 3624–3633. doi: https://doi.org/10.1111/1750-3841.14955.
  • Turiel, E. and Martín-Esteban, A. (2012) ‘Molecularly imprinted stir bars for selective extraction of thiabendazole in citrus samples’, J. Sep. Sci., 35, pp. 2962–2969. doi: https://doi.org/10.1002/jssc.201200554.
  • Turiel, E., Tadeo, J. L. and Martín-Esteban, A. (2007) ‘Molecularly Imprinted Polymeric Fibers for Solid-Phase Microextraction’, Analytical Chemistry, 79(8), pp. 3099–3104. doi: https://doi.org/10.1021/ac062387f.
  • Ulusoy, H. İ. (2017) ‘A versatile hydrogel including bentonite and gallocyanine for trace Rhodamine B analysis’, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 513, pp. 110–116. doi: https://doi.org/10.1016/j.colsurfa.2016.11.043.
  • Urraca, J. L. et al. (2014) ‘Multiresidue analysis of fluoroquinolone antimicrobials in chicken meat by molecularly imprinted solid-phase extraction and high performance liquid chromatography’, Journal of Chromatography A. Elsevier B.V., 1343(January 2006), pp. 1–9. doi: https://doi.org/10.1016/j.chroma.2014.03.045.
  • Uygun, H. D. E. et al. (2020) ‘Dispersive micro-solid-phase extraction using chitosan/polymethacrylate/clay bionanocomposite followed by UV–Vis spectrophotometry for determination of zinc’, Chemical Papers, 74, pp. 3399–3408. doi: https://doi.org/10.1007/s11696-020-01169-3.
  • Vasconcelos, E. et al. (2019) ‘New materials in sample preparation: Recent advances and future trends’, Trends in Analytical Chemistry. Elsevier Ltd, 119, p. 115633. doi: https://doi.org/10.1016/j.trac.2019.115633.
  • Vidal, L. et al. (2013) ‘Quaternary ammonium-functionalized silica sorbents for the solid-phase extraction of aromatic amines under normal phase conditions’, Journal of Chromatography A. Elsevier B.V., 1285, pp. 7–14. doi: https://doi.org/10.1016/j.chroma.2013.02.003.
  • Vieira, A. C., Santos, M. G. and Costa, E. (2017) ‘Solid-phase extraction of triazole fungicides from water samples using disks impregnated with carbon nanotubes followed by GC-MS analysis’, International Journal of Environmental Analytical Chemistry. Taylor & Francis, 97(1), pp. 29–41. doi: https://doi.org/10.1080/03067319.2016.1272679.
  • Wang, A. et al. (2021a) ‘Polyaniline-coated core-shell silica microspheres-based dispersive-solid phase extraction for detection of benzophenone-type UV filters in environmental water samples’, Environmental Advances, 3, p. 100037. doi: https://doi.org/10.1016/j.envadv.2021.100037.
  • Wang, H. et al. (2018) ‘Selective recognization of dicyandiamide in bovine milk by mesoporous silica SBA-15 supported dicyandiamide imprinted polymer based on surface molecularly imprinting technique’, Food Chemistry. Elsevier, 240, pp. 1262–1267. doi: https://doi.org/10.1016/j.foodchem.2017.08.066.
  • Wang, N., Zhou, X. and Cui, B. (2019) ‘Synthesis of a polymeric imidazolium-embedded octadecyl ionic liquid-grafted silica sorbent for extraction of flavonoids’, Journal of Chromatography A. Elsevier B.V., 1606, p. 460376. doi: https://doi.org/10.1016/j.chroma.2019.460376.
  • Wang, T. T. et al. (2014) ‘A novel ionic liquid-modified organic-polymer monolith as the sorbent for in-tube solid-phase microextraction of acidic food additives’, Analytical and Bioanalytical Chemistry, 406(20), pp. 4955–4963. doi: https://doi.org/10.1007/s00216-014-7923-4.
  • Wang, T. T. et al. (2016) ‘Using activated attapulgite as sorbent for solid-phase extraction of melamine in milk formula samples’, Analytical and Bioanalytical Chemistry, 408, pp. 6671–6677. doi: https://doi.org/10.1007/s00216-016-9779-2.
  • Wang, X. et al. (2021b) ‘Naturally occurring kaolinite as a sorbent for solid-phase extraction of calcitriol in soft capsules’, Applied Clay Science. Elsevier B.V., 210(24), p. 106162. doi: https://doi.org/10.1016/j.clay.2021.106162.
  • Wei, S. et al. (2016) ‘Development of magnetic molecularly imprinted polymers with double templates for the rapid and selective determination of amphenicol antibiotics in water, blood, and egg samples’, Journal of Chromatography A. Elsevier B.V., 1473, pp. 19–27. doi: https://doi.org/10.1016/j.chroma.2016.10.067.
  • Wilkes, J. S. (2002) ‘A short history of ionic liquids – From molten salts to neoteric solvents’, Green Chemistry, 4(2), pp. 73–80. doi: https://doi.org/10.1039/b110838g.
  • Wray, D. M., Batchelor-McAuley, C. and Compton, R. G. (2012) ‘Selective Curcuminoid Separation and Detection via Nickel Complexation and Adsorptive Stripping Voltammetry’, Electroanalysis, 24, pp. 2244–2248. doi: https://doi.org/10.1002/elan.201200560.
  • Wright, L. et al. (2010) ‘Hydrophilicity, the major determining factor influencing the solvation environment of protic ionic liquids’, Physical Chemistry Chemical Physics, 12, pp. 9063–9066. doi: https://doi.org/10.1039/B919348K.
  • Xie, X. et al. (2016) ‘Surface-imprinted magnetic particles for highly selective sulfonamides recognition prepared by reversible addition fragmentation chain transfer polymerization’, Analytical and Bioanalytical Chemistry, 408, pp. 963–970. doi: https://doi.org/10.1007/s00216-015-9190-4.
  • Xu, K. et al. (2017a) ‘Solid-phase extraction of DNA by using a composite prepared from multiwalled carbon nanotubes, chitosan, Fe3O4 and a poly(ethylene glycol)-based deep eutectic solvent’, Microchimica Acta. 184(10), pp. 4133–4140. doi: https://doi.org/10.1007/s00604-017-2444-4.
  • Xu, S., Li, J. and Chen, L. (2011) ‘Molecularly imprinted polymers by reversible addition-fragmentation chain transfer precipitation polymerization for preconcentration of atrazine in food matrices’, Talanta. Elsevier B.V., 85(1), pp. 282–289. doi: https://doi.org/10.1016/j.talanta.2011.03.060.
  • Xu, X., Duhoranimana, E. and Zhang, X. (2017b) ‘Preparation and Characterization of magnetic molecularly imprinted polymers for the extraction of hexamethylenetetramine in milk samples’, Talanta. Elsevier, 163, pp. 31–38. doi: https://doi.org/10.1016/j.talanta.2016.10.080.
  • Yadav, D. K. et al. (2020) ‘Copper oxide immobilized clay nano architectures as an efficient electrochemical sensing platform for hydrogen peroxide’, Journal of Chemical Sciences, 132, p. 68. doi: https://doi.org/10.1007/s12039-020-01778-1.
  • Yakout, A. A. et al. (2017) ‘Cross-linked graphene oxide sheets via modified extracted cellulose with high metal adsorption’, Carbohydrate Polymers. Elsevier Ltd., 172, pp. 20–27. doi: https://doi.org/10.1016/j.carbpol.2017.05.004.
  • Yang, J. et al. (2019a) ‘Calixarene and ionic liquid assisted matrix solid-phase dispersion microextraction of organic acids from fruit’, Journal of Chromatography A. Elsevier B.V., 1602, pp. 150–159. doi: https://doi.org/10.1016/j.chroma.2019.03.055.
  • Yang, L. et al. (2019b) ‘Green synthesis of zeolite 4A using fly ash fused with synergism of NaOH and Na2CO3’, Journal of Cleaner Production. Elsevier Ltd, 212, pp. 250–260. doi: https://doi.org/10.1016/j.jclepro.2018.11.259.
  • Yang, M. et al. (2016) ‘Using β-cyclodextrin/attapulgite-immobilized ionic liquid as sorbent in dispersive solid-phase microextraction to detect the benzoylurea insecticide contents of honey and tea beverages’, Food Chemistry. Elsevier Ltd, 197, pp. 1064–1072. doi: https://doi.org/10.1016/j.foodchem.2015.11.107.
  • Yang, X. et al. (2017) ‘Magnetic mixed hemimicelles dispersive solid-phase extraction based on ionic liquid-coated attapulgite/polyaniline-polypyrrole/Fe3O4 nanocomposites for determination of acaricides in fruit juice prior to high-performance liquid chromatography-diode array ’, Talanta. Elsevier, 166(October 2016), pp. 93–100. doi: https://doi.org/10.1016/j.talanta.2017.01.051.
  • Yao, L. et al. (2017) ‘Optimization of ultrasound-assisted magnetic retrieval-linked ionic liquid dispersive liquid–liquid microextraction for the determination of cadmium and lead in water samples by graphite furnace atomic absorption spectrometry’, Journal of Industrial and Engineering Chemistry. The Korean Society of Industrial and Engineering Chemistry, 56, pp. 321–326. doi: https://doi.org/10.1016/j.jiec.2017.07.027.
  • Yao, L. et al. (2018) ‘Ultrasound-assisted surfactant-enhanced emulsification microextraction using a magnetic ionic liquid coupled with micro-solid phase extraction for the determination of cadmium and lead in edible vegetable oils’, Food Chemistry. Elsevier, 256(January), pp. 212–218. doi: https://doi.org/10.1016/j.foodchem.2018.02.132.
  • Ye, L. and Mosbach, K. (2008) ‘Molecular Imprinting: Synthetic Materials As Substitutes for Biological Antibodies and Receptors’, Chem. Mater., 20, pp. 859–868. doi: https://doi.org/10.1021/cm703190w.
  • Yılmaz, E. and Soylak, M. (2016) ‘Preparation and characterization of magnetic carboxylated nanodiamonds for vortex-assisted magnetic solid-phase extraction of ziram in food and water samples’, Talanta, 158, pp. 152–158. doi: https://doi.org/10.1016/j.talanta.2016.05.042.
  • Yousefi, S. M. and Shemirani, F. (2017) ‘Carbon nanotube-based magnetic bucky gels in developing dispersive solid-phase extraction: application in rapid speciation analysis of Cr(VI) and Cr(III) in water samples’, International Journal of Environmental Analytical Chemistry, 97(11), pp. 1065–1079. doi: https://doi.org/10.1080/03067319.2017.1381236.
  • Yu, Y. et al. (2008) ‘Biodegradable Naphthenic Acid Ionic Liquids: Synthesis, Characterization, and Quantitative structure-biodegradation relationship’, Chem. Eur. J., 14, pp. 11174–11182. doi: https://doi.org/10.1002/chem.200800620.
  • Yuvali, D. et al. (2020) ‘Green synthesis of magnetic carbon nanodot/graphene oxide hybrid material (Fe3O4@C-nanodot@GO) for magnetic solid phase extraction of ibuprofen in human blood samples prior to HPLC-DAD determination’, Journal of Pharmaceutical and Biomedical Analysis, 179, p. 113001. doi: https://doi.org/10.1016/j.jpba.2019.113001.
  • Zawisza, B. et al. (2020) ‘Cellulose mini-membranes modified with TiO2 for separation, determination, and speciation of arsenates and selenites’, Microchimica Acta, 187(8), p. 430. doi: https://doi.org/10.1007/s00604-020-04387-4.
  • Zendehdel, M. et al. (2017) ‘Removal of fluoride from aqueous solution by adsorption on NaP:HAp nanocomposite using response surface methodology’, Process Safety and Environmental Protection. Institution of Chemical Engineers, 109, pp. 172–191. doi: https://doi.org/10.1016/j.psep.2017.03.028.
  • Zhang, Z. et al. (2011) ‘Simultaneous determination of trace sterols in complicated biological samples by gas chromatography – mass spectrometry coupled with extraction using b-sitosterol magnetic molecularly imprinted polymer beads’, Journal of Chromatography A. Elsevier B.V., 1218(28), pp. 4275–4283. doi: https://doi.org/10.1016/j.chroma.2011.05.022.
  • Zhao, B. et al. (2019) ‘Rapid determination of atrazine in apple juice using molecularly imprinted polymers coupled with gold nanoparticles-colorimetric/SERS dual chemosensor’, Food Chemistry. Elsevier, 276, pp. 366–375. doi: https://doi.org/10.1016/j.foodchem.2018.10.036.
  • Zhao, F. et al. (2017) ‘Subcritical water extraction combined with molecular imprinting technology for sample preparation in the detection of triazine herbicides’, Journal of Chromatography A. Elsevier B.V., 1515, pp. 17–22. doi: https://doi.org/10.1016/j.chroma.2017.06.011.
  • Zhao, F., Meng, Y. and Anderson, J. L. (2008) ‘Polymeric ionic liquids as selective coatings for the extraction of esters using solid-phase microextraction’, Journal of Chromatography A, 1208(1–2), pp. 1–9. doi: https://doi.org/10.1016/j.chroma.2008.08.071.
  • Zhao, X. et al. (2018) ‘Development of water-compatible molecularly imprinted solid-phase extraction coupled with high performance liquid chromatography – tandem mass spectrometry for the detection of six sulfonamides in animal-derived foods’, Journal of Chromatography A. Elsevier B.V., 1574, pp. 9–17. doi: https://doi.org/10.1016/j.chroma.2018.08.044.
  • Zheng, L. et al. (2019) ‘Talanta Core-shell quantum dots coated with molecularly imprinted polymer for selective photoluminescence sensing of perfluorooctanoic acid’, Talanta. Elsevier B.V., 194(May 2018), pp. 1–6. doi: https://doi.org/10.1016/j.talanta.2018.09.106.
  • Zhou, D. B. et al. (2018a) ‘Magnetic solid-phase extraction based on [60]fullerene functionalization of magnetic nanoparticles for the determination of sixteen polycyclic aromatic hydrocarbons in tea samples’, Journal of Chromatography A. Elsevier B.V., 1578, pp. 53–60. doi: https://doi.org/10.1016/j.chroma.2018.10.010.
  • Zhou, P. et al. (2018b) ‘Magnetic effervescent tablets containing ionic liquids as a non-conventional extraction and dispersive agent for determination of pyrethroids in milk’, Food Chemistry. Elsevier, 268(May 2017), pp. 468–475. doi: https://doi.org/10.1016/j.foodchem.2018.06.099.
  • Zhou, Q. et al. (2016) ‘The water – resistant zeolite imidazolate framework 67 is a viable solid phase sorbent for fluoroquinolones while efficiently excluding macromolecules’, Microchimica Acta. 183(6), pp. 1839–1846. doi: https://doi.org/10.1007/s00604-016-1814-7.