Publicaciones en las que colabora con SEVERO RAUL FERNANDEZ VIDAL (23)

2020

  1. On the machinability of an Al-63%SiC metal matrix composite

    Materials, Vol. 13, Núm. 5

  2. State of the art of the fused deposition modeling using PLA: Improving the performance

    Additive and Subtractive Manufacturing: Emergent Technologies (De Gruyter), pp. 59-112

2019

  1. Experimental study of laser texturing processes on the lubricant retention of carbide (WC-Co) surfaces

    Key Engineering Materials

  2. Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts

    Rapid Prototyping Journal, Vol. 26, Núm. 3, pp. 585-592

  3. Impact of chemical post-processing in fused deposition modelling (FDM) on polylactic acid (PLA) surface quality and structure

    Polymers, Vol. 11, Núm. 3

  4. Study of the one-shot drilling of CFRP/Ti6Al4V stacks with a double tip angle cutting-tool geometry

    AIP Conference Proceedings

2018

  1. A comparison of macro and microgeometrical properties of specimens made with a fdm commercial printer and its opensource retrofit version

    Annals of DAAAM and Proceedings of the International DAAAM Symposium

  2. Effects of laser microtexturing on the wetting behavior of Ti6Al4V alloy

    Coatings, Vol. 8, Núm. 4

  3. Experimental parametric model for adhesion wear measurements in the dry turning of an AA2024 alloy

    Materials, Vol. 11, Núm. 9

  4. Post-procesado de piezas en PLA tras su fabricación aditiva por deposición fundida (FDM)

    Revista DYNA, Vol. 93, Núm. 6, pp. 625-629

  5. Tool wear mechanism in cutting of stack CFRP/UNS A97075

    Materials, Vol. 11, Núm. 8

2017

  1. Preface

    Materials Science Forum

  2. Trabajos fin de grado y la norma UNE 157001: Un reto educativo

    Comunicaciones presentadas al XXI Congreso Internacional de Ingeniería de Proyectos: celebrado en Cádiz del 12 al 14 de julio de 2017

2016

  1. A single students’ experience for visualizing completely a semester subject

    Materials Science Forum

  2. Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens

    Advances in Materials Science and Engineering, Vol. 2016

2015

  1. Microgeometrical Deviations based Study of CFRP Drilled-holes

    Procedia Engineering

  2. Preliminary Design and Analysis of Tensile Test Samples Developed by Additive Manufacturing

    Procedia Engineering

  3. Preliminary study of the influence of manufacturing parameters in fused deposition modeling

    Annals of DAAAM and Proceedings of the International DAAAM Symposium

  4. Reverse Engineering Based Methodology for Modelling Cutting Tools

    Procedia Engineering

2014

  1. CUTTING SPEED AND FEEDRATE BASED ANALYSIS OF CUTTING FORCES IN THE ONE SHOT DRILLING (OSD) OF CFRC/AL HYBRID STACKS

    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B