Publicaciones en las que colabora con HILARIO VIDAL MUÑOZ (20)

2021

  1. Optimized preparation of washcoated clay honeycomb monoliths as support of manganese catalysts for acetone total combustion

    Microporous and Mesoporous Materials, Vol. 310

2018

  1. Low temperature prepared copper-iron mixed oxides for the selective CO oxidation in the presence of hydrogen

    Applied Catalysis A: General, Vol. 552, pp. 58-69

2017

  1. Use of pillared clays in the preparation of washcoated clay honeycomb monoliths as support of manganese catalysts for the total oxidation of VOCs

    Catalysis Today, Vol. 296, pp. 84-94

2016

  1. Carbon integral honeycomb monoliths as support of copper catalysts in the Kharasch-Sosnovsky oxidation of cyclohexene

    Chemical Engineering Journal, Vol. 290, pp. 174-184

  2. Natural clays for CO2 sequestration: study in the form of powder as previous stage before their use in structured filters.

    International Journal of Latest Research in Engineering and Technology, Vol. 2, Núm. 11, pp. 6-14

2015

  1. Clay honeycomb monoliths as support of manganese catalysts for VOCs oxidation

    4th International Renewable Energy and Environment Conference

  2. Unveiling the source of activity of carbon integral honeycomb monoliths in the catalytic methane decomposition reaction

    Catalysis Today, Vol. 249, pp. 86-93

2014

  1. A novel CoOx/La-modified-CeO2 formulation for powdered and washcoated onto cordierite honeycomb catalysts with application in VOCs oxidation

    Applied Catalysis B: Environmental, Vol. 144, pp. 425-434

  2. Experimental evidences of the relationship between reducibility and micro- and nanostructure in commercial high surface area ceria

    Applied Catalysis A: General, Vol. 479, pp. 35-44

2013

  1. Corrigendum to: Towards biofuel combustion with an easily extruded clay as a natural catalyst [Appl. Energy 107 (2013) 149-156]

    Applied Energy

2010

  1. Easy route to activate clay honeycomb monoliths for environmental applications

    Applied Clay Science, Vol. 47, Núm. 3-4, pp. 392-399

2009

  1. Easy extrusion of honeycomb-shaped monoliths using Moroccan natural clays and investigation of their dynamic adsorptive behavior towards VOCs

    Journal of Hazardous Materials, Vol. 170, Núm. 1, pp. 87-95

2008

  1. Original carbon-based honeycomb monoliths as support of Cu or Mn catalysts for low-temperature SCR of NO: Effects of preparation variables

    Applied Catalysis A: General, Vol. 342, Núm. 1-2, pp. 150-158

2007

  1. Physicochemical characterization and adsorptive properties of some Moroccan clay minerals extruded as lab-scale monoliths

    Applied Clay Science, Vol. 36, Núm. 4, pp. 287-296

2002

  1. Investigation by means of H2 adsorption, diffraction, and electron microscopy techniques of a cerium/terbium mixed oxide supported on a lanthana-modified alumina

    Chemistry of Materials, Vol. 14, Núm. 2, pp. 844-850

  2. Study of the structural modifications induced by reducing treatments on a Pd/Ce0.8Tb0.2O2-x/ La2O3-Al2O3 catalyst by means of X-ray diffraction and electron microscopy techniques

    Chemistry of Materials, Vol. 14, Núm. 3, pp. 1405-1410

2001

  1. Catalytic behavior of lanthana promoted Rh/SiO2 catalysts: Influence of the preparation procedure

    Applied Catalysis A: General, Vol. 208, Núm. 1-2, pp. 111-123

1999

  1. XPS analysis and microstructural characterization of a Ce/Tb mixed oxide supported on a lanthana-modified transition alumina

    Surface and Interface Analysis, Vol. 27, Núm. 10, pp. 941-949

1994

  1. Characterization of silica dispersed lanthana by CO2 adsorption

    Journal of Alloys and Compounds, Vol. 207-208, Núm. C, pp. 201-205

  2. Microstructure and catalytic properties of Rh and Ni dispersed on TiO2-SiO2 aerogels - Code: GP5

    Journal of Sol-Gel Science and Technology, Vol. 2, Núm. 1-3, pp. 831-836