Publicacions (45) Publicacions de LEANDRO GONZALEZ ROVIRA

filter_list

2025

  1. AlMgScZr alloys for laser powder bed fusion additive manufacturing. A review

    Materials and Design, Vol. 254

  2. Finite Element Simulation of Hot Rolling for Large-Scale AISI 430 Ferritic Stainless-Steel Slabs Using Industrial Rolling Schedules—Part 1: Set-Up, Optimization, and Validation of Numerical Model

    Materials, Vol. 18, Núm. 2

  3. Finite Element Simulation of Hot Rolling for Large-Scale AISI 430 Ferritic Stainless-Steel Slabs Using Industrial Rolling Schedules—Part 2: Simulation of the Roughing Stage and Comparison with Experimental Results

    Materials, Vol. 18, Núm. 6

  4. Novel combination of 3D-printing and electrochemical deposition to design and prepare metallic honeycomb supported catalysts for dry reforming of methane

    Chemical Engineering Journal, Vol. 506

2024

  1. Numerical Simulation as a Tool for the Study, Development, and Optimization of Rolling Processes: A Review

    Metals, Vol. 14, Núm. 7

2023

  1. Effect of the heat treatment on the mechanical properties and microstructure of Scalmalloy® manufactured by Selective Laser Melting (SLM) under certified conditions

    Materials Characterization, Vol. 196

  2. Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties

    Journal of Materials Research and Technology, Vol. 25, pp. 4409-4424

  3. Localized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusion

    Corrosion Science, Vol. 218

2022

  1. Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

    Corrosion Science, Vol. 201

2021

  1. A review on the abrasive water-jet machining of metal–carbon fiber hybrid materials

    Metals, Vol. 11, Núm. 1, pp. 1-29

  2. Application of commercial surface pretreatments on the formation of cerium conversion coating (Cecc) over high-strength aluminum alloys 2024-t3 and 7075-t6

    Metals, Vol. 11, Núm. 6

  3. Study of the influence of laser energy density on the surface roughness of Scalmalloy<sup>®</sup> samples manufactured by DMLS technology

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012036

  4. Study of the influence of laser energy density on the surface roughness of Scalmalloy® samples manufactured by DMLS technology

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2020

  1. Assessment of the corrosion resistance of self-ordered anodic aluminum oxide (AAO) obtained in tartaric-sulfuric acid (TSA)

    Surface and Coatings Technology, Vol. 399

2019

  1. Influence of aerospace standard surface pretreatment on the intermetallic phases and cecc of 2024-t3 al-cu alloy

    Metals, Vol. 9, Núm. 3

  2. Modificaciones de la microestructura y la capa pasiva de la aleación 2024-T3 Al-Cu durante una limpieza química empleada en la industria aeroespacial

    Revista de metalurgia, Vol. 55, Núm. 2, pp. 144

  3. The Role of Gold-Alumina Template in the Electrochemical Deposition of CeO2 Nanotubes

    Particle and Particle Systems Characterization, Vol. 36, Núm. 10

2018

  1. Adhesive behaviour of carbon fibre reinforced plastic panels manufactured using woven and unidirectional tape after ultraviolet laser surface treatment

    Journal of Composite Materials, Vol. 52, Núm. 7, pp. 853-865

  2. Caracterización de nuevas generaciones de preimpregnados fuera deautoclave (OoA)

    XII Congreso Nacional de Materiales Compuestos

  3. Efecto del desalineamiento de los marcos de máquinas ensayo sobre las propiedades mecánicas de CFRPs

    Congreso Nacional de Materiales Compuestos