Publicacions (280) Publicacions de SERGIO IGNACIO MOLINA RUBIO

2024

  1. Diseño para la fabricación aditiva en el sector médico.: Herramientas y casos de estudio

    Revista DYNA, Vol. 99, Núm. 1, pp. 31-36

  2. Influence of the Carbon Fiber Length Distribution in Polymer Matrix Composites for Large Format Additive Manufacturing via Fused Granular Fabrication

    Polymers, Vol. 16, Núm. 1

  3. Large format additive manufacturing of polyethylene terephthalate (PET) by material extrusion

    Additive Manufacturing, Vol. 79

  4. Modelado paramétrico de luminarias bioinspiradas para tecnologías de fabricación aditiva

    Revista DYNA, Vol. 99, Núm. 1, pp. 17-21

2023

  1. Additive Manufacturing of Thermoplastic Polyurethane-Cork Composites for Material Extrusion Technologies

    Polymers, Vol. 15, Núm. 15

  2. Experimental and simulated study of 3D-printed couplings’ suitability for industrial application

    International Journal of Advanced Manufacturing Technology, Vol. 127, Núm. 1-2, pp. 665-676

  3. Fatty acid – functionalized cellulose nanocomposites for vat photopolymerization

    Additive Manufacturing, Vol. 61

  4. Large Format Additive Manufacturing in Furniture design with novel cork based polymeric materials

    XXXI INGEGRAF International Conference 29–30 June, 1 July 2022, Málaga, Spain

  5. Low dose electron tomography of novel nanocomposites for additive manufacturing

    Polymer Testing, Vol. 128

  6. Manufacture and Characterization of Polylactic Acid Filaments Recycled from Real Waste for 3D Printing

    Polymers, Vol. 15, Núm. 9

  7. Polymer nanocomposites for plasmonics: In situ synthesis of gold nanoparticles after additive manufacturing

    Polymer Testing, Vol. 117

  8. Responsive Optical Materials Based on Ligand-Free Perovskite Quantum Dots Embedded in Mesoporous Scaffolds

    ACS Applied Materials and Interfaces, Vol. 15, Núm. 1, pp. 1808-1816

  9. Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing

    Polymers, Vol. 15, Núm. 16

2022

  1. Basalt Fiber Composites with Reduced Thermal Expansion for Additive Manufacturing

    Polymers, Vol. 14, Núm. 15

  2. Biomasa para producción de composites de base polimérica y su implementación en fabricación aditiva

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Vol. 123, Núm. 776

  3. Biomass waste from rice and wheat straw for developing composites by stereolithography additive manufacturing

    Industrial Crops and Products, Vol. 189

  4. Comparison of the Material Quality of AlxIn1−xN (x—0–0.50) Films Deposited on Si(100) and Si(111) at Low Temperature by Reactive RF Sputtering

    Materials, Vol. 15, Núm. 20

  5. Effect of Thermal and Hydrothermal Accelerated Aging on 3D Printed Polylactic Acid

    Polymers, Vol. 14, Núm. 23

  6. Induced damage during STEM-EELS analyses on acrylic-based materials for Stereolithography

    Polymer Degradation and Stability, Vol. 203

  7. Influencia de la incorporación de corcho microparticulado en materiales poliméricos especialmente orientados a Fabricación Aditiva de Gran Formato

    XVI Congreso Nacional de Materiales, XVI CNMAT2022