Publications by the researcher in collaboration with FRANCISCO MIGUEL MORALES SANCHEZ (25)

2025

  1. Energy-efficient W-doped VO2-based smart glasses by glancing angle co-deposition and subsequent rapid thermal annealing

    Results in Engineering, Vol. 27

  2. Evolution of the oxidation of V zigzag nanostructures on Si: Prime conditions to reach uniform thermochromic VO2(M) thin films

    Applied Surface Science Advances, Vol. 25

  3. Impact of Sample Preparation Approach on Transmission Electron Microscopy Investigation of Sputtered AlNi Multilayers Used for Reactive Soldering

    Advanced Engineering Materials, Vol. 27, Núm. 3

  4. Influence of Additional Intermediate Thick Al Layers on the Reaction Propagation and Heat Flow of Al/Ni Reactive Multilayers

    Advanced Engineering Materials, Vol. 27, Núm. 3

  5. Optical and electrical properties of thermochromic VO2 thin film combined with Au or Zr-containing compounds nanoparticles

    Optics and Laser Technology, Vol. 192

  6. Reactive Nanoparticle Composed Bilayers: An Alternate Route Toward the Production of Pt/Al Nanofoils

    Small

2024

  1. Enhancing luminous transmittance and hysteresis width of VO2-based thermochromic coatings by combining GLAD and RGPP approaches

    Construction and Building Materials, Vol. 419

2023

  1. Effect of Interfacial Schemes on the Optical and Structural Properties of InAs/GaSb Type-II Superlattices

    ACS Applied Materials and Interfaces, Vol. 15, Núm. 6, pp. 8624-8635

  2. Facile Fabrication of High-Performance Thermochromic VO2-Based Films on Si for Application in Phase-Change Devices

    Chemistry of Materials, Vol. 35, Núm. 11, pp. 4435-4448

  3. Novel Gas Phase Route Toward Patterned Deposition of Sputter-Free Pt/Al Nanofoils

    Advanced Materials Technologies, Vol. 8, Núm. 18

2022

  1. Characterization of pores in polished low temperature co-fired glass-ceramic composites for optimization of their micromachining

    Surface Topography: Metrology and Properties, Vol. 10, Núm. 4

  2. Monolithic integration of a 10 μm cut-off wavelength InAs/GaSb type-II superlattice diode on GaAs platform

    Scientific Reports, Vol. 12, Núm. 1

  3. Surface measurement data of polished LTCC: Characterization of pores in polished low temperature co-fired glass-ceramic composites for optimization of their micromachining

    Dryad

2021

  1. Atomically resolved 3D structural reconstruction of small quantum dots

    Nanoscale, Vol. 13, Núm. 16, pp. 7550-7557

2019

  1. (S)TEM methods contributions to improve the fabrication of InGaN thin films on Si, and InN nanostructures on flat Si and rough InGaN

    Journal of Alloys and Compounds, Vol. 783, pp. 697-708

  2. Comprehensive (S)TEM characterization of polycrystalline GaN/AlN layers grown on LTCC substrates

    Ceramics International, Vol. 45, Núm. 7, pp. 9114-9125

  3. LTCC as substrate - Enabling semiconductor and packaging integration

    2019 22nd European Microelectronics and Packaging Conference and Exhibition, EMPC 2019

  4. Unravelling the polarity of InN quantum dots using a modified approach of negative-spherical-aberration imaging

    Nanoscale, Vol. 11, Núm. 28, pp. 13632-13638

2018

  1. Engineering of III-Nitride Semiconductors on Low Temperature Co-fired Ceramics

    Scientific Reports, Vol. 8, Núm. 1

  2. Formation mechanisms of single-crystalline InN quantum dots fabricated via droplet epitaxy

    Journal of Crystal Growth, Vol. 493, pp. 65-75